
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Plastic upper guide for 1/4 inch door is designed for by-passing wood and/or glass doors, so it helps keep paired doors running in defined upper channels when they slide past each other. This EPCO guide is part of a sliding door hardware system in the builders hardware and sliding door hardware category, so it supports typical residential or light commercial sliding door layouts using narrow doors. The guide is made from high impact, extruded polystyrene, which provides a rigid plastic profile that resists typical knocks at the head of the opening during normal operation. Its material construction also keeps the contact surface consistent along the length of the opening, which matters when you want smooth tracking for both wood and glass door edges.
This EPCO plastic upper guide for 1/4 inch door works with by-passing wood and/or glass doors, so it fits applications where doors share overlapping tracks above an opening. The 12 ft long length gives a single continuous guide segment, which simplifies alignment over longer runs because the guiding surface follows one extrusion instead of multiple shorter pieces. With a width of 0.844 inch, the guide presents a predictable bearing area for the door edge or track, which matters when routing or fitting recesses at the top of the opening. Its use with Plastic Track 212 and Kerf Track 810 means the guide is suited to installations built around those track designs, keeping the system components coordinated.
This plastic upper guide for 1/4 inch door serves by-passing wood and/or glass doors, so it fits situations where two or more doors slide past each other in front of a shared opening. As part of sliding door hardware, it works at the head of wardrobes, closets, or similar openings that use narrow 1/4 inch panels. Being 12 ft long, it reaches across wider spans commonly found in larger openings, so one piece can cover the full run. The guide width of 0.844 inch gives a defined size that fits alongside Plastic Track 212 and Kerf Track 810, so it integrates into systems built around those tracks for controlled door movement.
The high impact, extruded polystyrene body of this EPCO upper guide provides a uniform plastic surface along its 12 ft length, which supports consistent contact with door edges or related track surfaces as the doors slide. Its design specifically for 1/4 inch by-passing wood and/or glass doors narrows the fit range, so the guide aligns closely with that door thickness in a sliding assembly. When paired with Plastic Track 212 or Kerf Track 810, the guide participates in a coordinated track-and-guide setup, which helps maintain door position in their respective paths. The 0.844 inch width creates a repeatable dimension for routing or kerfing at the head, so once the opening detail is sized, the guide profile can sit in place and support repeated sliding cycles.
This plastic upper guide is designed for 1/4 inch by-passing wood and/or glass doors, so it aligns with panels built to that thickness in sliding door assemblies.
The EPCO plastic upper guide is 12 ft long, so it spans wide openings in a single piece for continuous sliding support across the full door run.
The upper guide is made from high impact, extruded polystyrene, so it provides a rigid plastic profile suitable for repeated sliding door movement.
This upper guide is for use with Plastic Track 212 and Kerf Track 810, so it fits sliding systems based on those specific track designs.
The EPCO 2214-BR upper guide is 0.844 inch wide, so it sets a clear dimension for the head groove or channel in the sliding door opening.
This plastic upper guide supports 1/4 inch by-passing wood and/or glass doors at the head, so it helps maintain their path as they slide along the tracks.
The EPCO plastic upper guide for 1/4 inch door suits projects using by-passing wood and/or glass doors, so it fits systems built around that door thickness. Its 12 ft long, 0.844 inch wide profile gives a consistent guiding surface sized for typical sliding openings. Designed for use with Plastic Track 212 and Kerf Track 810, it integrates with those tracks as part of a coordinated sliding door hardware solution when planning new installations or updating existing runs.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Roll | EP810 Mfr# 810 | Single Channel Tracks Plastic Kerf Tracks and Glides for Lightweight Doors, 100' | ||||
Sold in: 1 Each | EPC214BR Mfr# 214-BR | Plastic Track for 1/4" Door Brown |
Sold In: 1 Each