Plastic Track for 1/4" Door Brown

Plastic Track For 1/4 Inch Door Bypass Runs

Plastic track for 1/4 inch door gives you a dedicated sliding path for by-passing wood and/or glass doors, so panels move cleanly past each other instead of dragging on the cabinet or casework. The EPCO track is part of the sliding door hardware category, which keeps it aligned with common builders hardware layouts for closets, cabinets, or built-ins using bypass doors. High impact, extruded polystyrene construction provides a rigid, shaped channel for the doors, supporting smoother travel along the full opening. The 12 ft long length lets you span wide runs or cut multiple shorter sections from a single piece, which helps match different opening sizes on one project. The 0.844 inch width defines the footprint you need to allow in your design, tying the track neatly into face frames or frameless layouts without guessing the space required.

Key Sliding Track Details For Daily Use

• High impact, extruded polystyrene material forms a stable channel, so the bypass doors follow a defined path that supports more controlled sliding during everyday use.
• For 1/4 inch by-passing wood and/or glass doors, the track geometry is sized for that door thickness, helping the panels stay aligned as they cross in front of each other.
• 12 ft long track lets you cover wide spans or cut sections to length, so one piece can serve multiple openings on the same job when layout dimensions vary.
• 0.844 inch width sets a clear mounting footprint, which helps you plan rail locations and surrounding trim without interference in the sliding door hardware run.
• Brown color helps the track visually recede against darker casework, reducing distraction at the top of the opening while the doors move along the guide.
• Designed for use with Upper Guide 2214, so the track and guide work together as a matched bypass system in sliding door hardware assemblies.

Sliding Track Size And Layout Planning

The 12 ft long EPCO plastic track gives you a continuous run for sliding door hardware, so you can cut sections to your required opening instead of piecing shorter tracks together. Its 0.844 inch width defines the strip of real estate you allocate at the head of the opening, which supports cleaner layouts when coordinating with face frames, headers, or soffits. Because the track is designed for 1/4 inch by-passing wood and/or glass doors, the geometry holds that thickness in mind as you position stiles and overlaps, tying door construction and track placement into one measured setup.

Where This EPCO Sliding Track Excels

Track For 1/4 Inch Bypass Wood Or Glass Doors

This EPCO plastic track is specified for 1/4 inch by-passing wood and/or glass doors, so it fits projects where thin panels need to slide past one another instead of swinging. That makes it suited to sliding door hardware layouts in cabinets, casework, or other built-ins that use lightweight bypass doors. The high impact, extruded polystyrene body forms a defined running surface for these doors, guiding their movement along the opening rather than leaving panels to ride on unfinished edges. Because the track is part of a sliding system that uses Upper Guide 2214, the doors follow a coordinated path at the top, which supports more predictable clearances between panels and surrounding structure.

Dimensions And Material That Support Clean Runs

The 12 ft long length of the EPCO 214-BR track lets you carry a single, straight channel across the full width of a wide opening, which helps reduce alignment problems that can occur with shorter, segmented tracks. When jobs call for smaller spans, that same length can be cut into multiple sections, extending the utility of one piece across several openings that share the 1/4 inch door requirement. The 0.844 inch width becomes a fixed design number in your layout, so header depth and adjacent moldings can be planned around the sliding path rather than adjusted after installation. High impact, extruded polystyrene construction shapes the profile that receives the bypass doors, giving them a consistent surface to travel on as they move along the guide and interact with Upper Guide 2214.

Practical Questions About This Sliding Door Track

Select This Track For 1/4 Inch Bypass Runs

The EPCO plastic track for 1/4 inch door gives you a defined sliding path for wood and/or glass bypass doors, tying door thickness to a matching channel. With a 12 ft long length and 0.844 inch width, the 214-BR profile fits into planned openings instead of improvising clearances. High impact, extruded polystyrene construction and the link to Upper Guide 2214 anchor it within sliding door hardware assemblies. For projects needing a brown track that follows these dimensions and door requirements, this EPCO option from Wurth Baer Supply aligns the hardware details with the layout demands.