Plastic Track for 1/4" Door White

Plastic Track For 1/4 Inch Bypass Door Runs

Plastic Track for 1/4" Door White is a high impact extruded polystyrene track designed for 1/4 inch by-passing wood and/or glass doors, so it provides a dedicated running channel sized for common lightweight door panels. The 12 ft long length lets you span typical closet or cabinet openings in a single run, which reduces joints that can catch door edges during movement. Its 0.844 inch width sets a consistent footprint along the opening, helping maintain straight alignment between parallel bypass doors. The high impact polystyrene construction resists everyday bumps along the door path, so the track keeps its shape under normal residential or light commercial use. The white color lets this EPCO track visually blend with many painted casework and trim layouts, which keeps the sliding hardware unobtrusive in finished installations. As part number 214-WH from EPCO, it matches projects specified around this specific sliding door hardware component.

Key Track Details That Support Door Performance

• The design for 1/4 inch by-passing wood and/or glass doors sets a clear panel thickness target, which helps installers size doors correctly for smooth sliding without excess side play in the track.
• High impact extruded polystyrene construction provides a stable, molded channel, so the track maintains its profile shape along the full run when doors travel repeatedly across the opening.
• The 12 ft long length lets you cover wide openings in one continuous piece, which avoids mid-span transitions that can disrupt door travel and catch edges over time.
• The 0.844 inch width defines the mounting footprint, so layout planning for the supporting surface stays consistent from one installation to the next.
• The white finish keeps the EPCO track visually low-profile against light-colored trim, which supports clean cabinet or closet lines where exposed hardware would be distracting.

Sliding Door Track Dimensions For Straight Runs

The 12 ft long EPCO 214-WH track delivers one continuous guiding surface, which simplifies marking and fastening along a header or cabinet soffit. Its 0.844 inch width gives you a known bearing surface to align with the front edge of a cabinet or opening, helping keep by-passing doors parallel to the face frame or jamb. Because it is designed for 1/4 inch by-passing wood and/or glass doors, this polystyrene profile is sized to receive door edges of that thickness, which supports predictable clearance at the overlap between panels. The high impact extruded polystyrene body carries this cross-section consistently along the full length, so the channel geometry that guides door edges does not vary as doors slide.

Using EPCO 214-WH Track In Bypass Door Runs

Applications For 1/4 Inch Wood Or Glass Panels

This EPCO sliding door hardware track is specified for 1/4 inch by-passing wood and/or glass doors, so it fits projects that use thinner panels in closets, display cabinets, and similar openings. The 12 ft long format supports full-width runs where two doors share the same opening, letting them slide past each other within the same track line. As part of the Builders Hardware and Sliding Door Hardware category, this polystyrene profile serves as the guiding channel in light-duty bypass systems using 1/4 inch panels. The 0.844 inch wide base gives cabinetmakers and carpenters a defined strip to position along a head member, which helps keep the track centered over the opening so both doors seat reliably in the channel. Because this track works with either wood or glass at the same thickness, it accommodates design changes between solid and glazed panels while keeping the same mounting footprint.

Details That Support Smooth, Consistent Door Travel

The high impact extruded polystyrene construction of the 214-WH track delivers a molded profile with uniform dimensions along the entire 12 ft length, which promotes consistent contact with the edges of 1/4 inch doors. This material choice helps the channel resist minor nicks where doors start and stop, so the guiding surface stays even and doors do not catch during regular operation. The 0.844 inch width defines how far the track projects across the header or cabinet ceiling, giving installers a stable platform to align with the door line for repeatable layouts on multi-opening projects. Its white color allows the track to blend with many painted trims and casework interiors, which keeps visual focus on the doors themselves rather than the sliding door hardware components. With the EPCO 214-WH part number, shops can standardize on a specific track profile whenever they build bypass assemblies around 1/4 inch wood or glass panels.

Common Questions About EPCO 214-WH Sliding Track

Choose EPCO 214-WH Track For 1/4 Inch Doors

The EPCO Plastic Track for 1/4" Door White combines a 12 ft long run, 0.844 inch width, and high impact extruded polystyrene construction to support by-passing 1/4 inch wood and/or glass doors in one defined profile. Its white finish and Builders Hardware | Sliding Door Hardware classification align it with cabinet, closet, and similar sliding door work. For projects calling for EPCO part number 214-WH, this track gives shops and installers a consistent guiding channel sized specifically for 1/4 inch bypass panels.