Plastic Track for 1/4" Door Tan

Plastic Track For 1/4" Door Sliding Applications

Plastic Track for 1/4" Door is an EPCO sliding door track designed for 1/4 inch by-passing wood and/or glass doors, so it gives a dedicated running channel that matches common lightweight cabinet and closet panels. The high impact, extruded polystyrene construction provides a rigid guide surface, which supports smooth door travel under normal residential or light commercial use. The 12 FT Long length allows continuous runs across wider openings, reducing joint transitions that can interrupt door movement. Its 0.844 inch width defines the required mounting footprint, helping you plan the rail position on the header or supporting member. The tan color offers a neutral tone that blends with many casework finishes, which helps the track visually recede in built-ins or closet frames. Designed for use with Upper Guide #2214, this track aligns with that specific guide profile to create a coordinated sliding system.

Key Sliding Track Details For Real Jobs

• For 1/4 inch by-passing wood and/or glass doors, the track supports paired panels that slide past each other, which is useful for cabinet, closet, or similar openings using slim door material.
• High impact, extruded polystyrene construction provides a stable plastic channel, giving consistent guidance for the doors along the full run during everyday operation.
• 12 FT Long track length spans wide openings in a single piece, which reduces the need for joints that can affect alignment or cause door hang-ups at seams.
• 0.844 inch width defines the track footprint, helping you size the mounting surface and relate the groove location to adjacent face frames or panels.
• For use with Upper Guide #2214, the profile is matched to that guide type, supporting a coordinated upper guiding arrangement along the track.
• The tan color provides a neutral appearance, letting the track sit quietly against light wood tones or painted cases where visible edges matter.

Track Fit, Length, And Mounting Planning

The 0.844 inch wide EPCO sliding door track sets a clear dimension for layout, so you can position the channel relative to door thickness and front reveals. Because the piece is 12 FT Long, it can cover long openings in one continuous section, which helps maintain straight tracking and consistent door spacing across the span. This Plastic Track for 1/4" Door is built for 1/4 inch by-passing wood and/or glass doors, so door panels sized to that thickness sit correctly in the guide without excessive side play. Working with the specified Upper Guide #2214 ties the track and guide together as a matched set, which simplifies deciding where the doors ride within the opening. The tan finish lets the track visually blend into many casework interiors, supporting a clean look where the top rail is visible.

Using This EPCO Track In Sliding Door Work

Where This Plastic Track For 1/4" Door Fits Best

This EPCO sliding door track belongs in builders hardware for sliding door hardware applications, so it suits projects where by-passing 1/4 inch wood and/or glass doors are part of the design. In cabinet or closet style openings needing slim doors, the 1/4 inch door rating defines the panel thickness that works with the channel. The 12 FT Long length makes it practical for wider built-ins or long wardrobe runs, because one piece can stretch across the entire opening. With a 0.844 inch width, the track nests onto a relatively narrow support, fitting well on the underside of casework tops or inside upper framing. The tan color supports interior runs where the track may be visible when doors are open, helping it coordinate with light laminates or natural wood tones.

Details That Support Repeatable Sliding Door Results

The high impact, extruded polystyrene material gives this Plastic Track for 1/4" Door a consistent molded profile, which helps maintain a uniform channel shape for the doors along the full 12 FT Long span. Because it is designed for 1/4 inch by-passing wood and/or glass doors, door edges track within a dimensioned space, supporting predictable clearances between panel faces. The 0.844 inch width offers a repeatable reference when laying out multiple openings, allowing the same track position to be duplicated from cabinet to cabinet. Matching the track to Upper Guide #2214 ties the upper guidance to a known part number, which supports repeat ordering and consistent performance across projects using the same sliding detail. Operating within the Builders Hardware sliding door hardware category, this EPCO part number 214-T can be specified as a defined component, aiding documentation and coordination with shop drawings.

Common Questions About EPCO Sliding Door Track

Selecting This Track For 1/4 Inch Door Runs

The Plastic Track for 1/4" Door from EPCO combines a 12 FT Long span, 0.844 inch width, and high impact extruded polystyrene construction, giving you a defined channel for 1/4 inch by-passing wood and/or glass doors. Its tan color and Builders Hardware sliding door hardware classification suit cabinet and similar projects where appearance and function both matter. When your layout matches the 1/4 inch door requirement and the use with Upper Guide #2214, this 214-T track serves as a clearly specified sliding component ready for by-passing door work.