Plastic Track for 1/4" Door Gray

Plastic Track For 1/4 Inch Bypassing Doors

Plastic Track for 1/4" Door Gray is an EPCO sliding door track designed for 1/4" by-passing wood and/or glass doors, so it gives you a dedicated channel to guide lightweight doors smoothly past each other in cabinets or similar projects. The track is made from high impact, extruded polystyrene, which provides a rigid, damage-resistant profile that stands up to repeated door movement in everyday use. Its 12 FT length allows long, continuous runs, which reduces joint interruptions along the opening and supports cleaner movement on wider cabinets or casework. The track measures 0.844" wide, giving a defined footprint to plan your groove or mounting surface and align multiple runs consistently. This track is designed for use with Upper Guide #2214, tying the top guide and track together into a matched system that simplifies layout when you are building or replacing bypass door assemblies.

Key Sliding Track Details For Door Projects

• The EPCO brand identifies this Plastic Track for 1/4" Door Gray within a known sliding door hardware line, which helps you match the track profile to other EPCO components in multi-door or repeat builds.
• The high impact, extruded polystyrene material resists cracking under normal door movement, so the track maintains its shape and continues to guide doors consistently over time in typical cabinet environments.
• The 12 FT long track provides a single continuous guiding surface over longer openings, which reduces alignment steps and helps avoid minor bumps where shorter sections would otherwise meet.
• The 0.844" width gives you a clear dimension for routing or setting a mounting surface, so you can size recesses or supports precisely and keep parallel tracks evenly spaced across a run.
• Design intent for 1/4" by-passing wood and/or glass doors focuses the fit on that door thickness, which simplifies selecting compatible panels when laying out cabinet, closet, or display door pairs.
• Designed use with Upper Guide #2214 connects the track to a specific guide component, which streamlines specifying parts and helps keep the top guide and track working together as a coordinated sliding system.

Sliding Door Track Dimensions And Fit Details

This Plastic Track for 1/4" Door Gray is built for 1/4" by-passing wood and/or glass doors, so door panels in that thickness range sit properly in the channel and move without excessive side play. Its 0.844" width establishes the footprint you need to allow on the cabinet or casework edge, helping you plan groove width or mounting surfaces before cutting. The 12 FT length means the track can span wide cabinet or opening dimensions in one piece, which supports straight, predictable alignment during installation. Being designed for use with Upper Guide #2214 gives you a clear pairing between guide and track, allowing you to build a matched sliding path from the top of the opening.

Using This EPCO Track In Sliding Door Runs

Where This Plastic Track For 1/4 Inch Doors Fits

This EPCO Plastic Track for 1/4" Door Gray is specified for 1/4" by-passing wood and/or glass doors, which directs it toward light cabinet, closet, or display-style doors where panels slide past each other rather than swinging. The 12 FT long profile lets you cover wide spans in a single piece, which works well on longer cabinet banks or continuous upper runs that benefit from uninterrupted guidance. With a track width of 0.844", the profile suits applications where you can allocate that footprint at the cabinet top or inside a header, giving enough surface for stable mounting and repeatable alignment. Its high impact, extruded polystyrene construction supports use in typical indoor woodworking and casework environments where doors are operated frequently but loads remain moderate.

Why The Track Material And Size Support Clean Movement

The high impact, extruded polystyrene used in this Plastic Track for 1/4" Door Gray provides a consistent, molded channel that keeps its shape during normal use, which helps by-passing doors track along the same path each time without binding from minor edge damage. The 0.844" width and 12 FT length work together to create a long, straight guiding surface, so once you align the track, doors can travel the full opening without encountering joints or abrupt transitions. Designing the track specifically for 1/4" by-passing wood and/or glass doors focuses the internal profile on that thickness, giving the doors a defined path and reducing the tendency to wander. Its pairing with Upper Guide #2214 ties the sliding path and guide location together, supporting smoother door movement across repeated installations that share the same EPCO sliding door hardware setup.

Common Questions About EPCO 214-G Sliding Track

Selecting This Track For 1/4 Inch Door Runs

The EPCO Plastic Track for 1/4" Door Gray provides a 12 FT long, 0.844" wide channel for 1/4" by-passing wood and/or glass doors, so it fits sliding cabinet or similar projects built around that door thickness. Its high impact, extruded polystyrene construction and pairing with Upper Guide #2214 align it with EPCO sliding door hardware workflows. Order EPCO part 214-G from Wurth Baer Supply when you need this specific track profile for building or repeating 1/4" bypass door assemblies.