Aluminum Track with Insert for 1/4" Door 12'L, 1.063" W Clear Anodized

Aluminum Track With Insert For 1/4 Door

Aluminum track with insert for 1/4 door is EPCO sliding door hardware designed for 1/4 inch by-passing wood and/or glass doors, so it supports typical cabinet or closet bypass layouts using standard 1/4 inch panels. The 12 foot long track spans wider openings in a single run, which helps keep door movement consistent across multi-door installations. The 1.063 inch width provides a defined bearing surface for the doors, giving the hardware a stable guide path. Extruded aluminum construction keeps the track profile uniform along the full length, helping doors travel smoothly from end to end. The clear anodized finish on the aluminum delivers a clean, neutral appearance that works with different wood tones and door materials. Black fiber inserts sit in the track, guiding the doors as they move so panels ride on a quieter, less abrasive surface during operation.

Key Sliding Track Details For Daily Use

• Design for 1/4 inch by-passing wood and/or glass doors means the track is sized for these panel thicknesses, helping doors nest and pass cleanly on typical bypass cabinet or closet applications.
• Flush mounting capability lets the track sit level with its mounting surface, which helps create a streamlined look and reduces edges that could interfere with door travel or trim work.
• 12 foot length gives enough continuous track for long openings, reducing joints that can interrupt rollers or guides and helping doors glide more evenly across the span.
• 1.063 inch width defines the track footprint, helping installers plan clearances at the header and coordinate door overlap, guides, and stops in the sliding assembly.
• Extruded aluminum construction keeps the cross-section consistent along the full run, which supports predictable movement and helps maintain alignment between both bypassing doors.
• Black fiber inserts in the aluminum track provide the contact surface for the doors, moderating friction and supporting smoother, quieter sliding over repeated use.

Flush Mount Sliding Door Track Setup

The track is described for flush mounting, so it is intended to sit even with the supporting surface rather than on stand-offs, which helps create a clean header or jamb detail for the bypassing doors. With a 1.063 inch wide footprint, installers can lay out their mounting surface so the track centers properly over the opening while preserving door overlap. The 12 foot length provides a single continuous piece, allowing drilling and mounting along the full span without aligning multiple segments. Because the track is made from extruded aluminum with black fiber inserts, both the rigid profile and the insert path are consistent, supporting repeatable door movement after the track is fastened. For use with Upper Guide #48A14-A, the track is part of a coordinated sliding system where the guide and track are described to work together.

Using This Track In Bypassing Door Runs

Where This Sliding Track Fits Best

This EPCO aluminum track is listed for 1/4 inch by-passing wood and/or glass doors, so it fits applications where two or more thin panels share an opening and slide past each other, such as upper cabinets or closet-style fronts. Being 12 feet long, it suits wider runs where continuous support is needed across several door panels, reducing transitions that could affect how doors stack when opened. The 1.063 inch width keeps the track footprint compact, which is useful where the header area is tight or where the design calls for a narrow reveal above the doors. The extruded aluminum body with a clear anodized finish works in visible locations because the metal has a uniform appearance. Black fiber inserts provide the sliding surface in the channel, so the door edges or guides engage a consistent material along the entire opening length.

Details That Support Smooth, Repeatable Motion

The extruded aluminum construction means the track profile remains consistent from one end of the 12 foot length to the other, which helps keep the bypassing doors aligned as they slide. The clear anodized finish on the aluminum creates a stable exterior surface, supporting long-term contact with guides while presenting a finished look above the door line. Black fiber inserts run within the aluminum track and act as the contact interface, so the sliding action takes place against this fiber material, which moderates the feel and sound of door movement. The track is specified for flush mounting, so when it is set even with its mounting surface, the transition from adjacent trim or panels into the track area stays minimal, helping doors move without catching. For use with Upper Guide #48A14-A, the track and guide share a described relationship that helps ensure the guide engages the track profile as intended.

Common Questions About This EPCO Sliding Track

Choose This Track For 1/4 Inch Bypassing Doors

This EPCO aluminum track with black fiber inserts is configured for 1/4 inch by-passing wood and/or glass doors, so it directly matches common thin-panel sliding layouts. The 12 foot length and 1.063 inch width give you a defined, continuous path sized for wider openings. Extruded aluminum with a clear anodized finish provides a consistent, finished-looking profile wherever the track is exposed. With flush mounting capability and use with Upper Guide #48A14-A, this track offers a coordinated sliding solution ready to integrate into your bypass door run.