Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Aluminum Track with Insert for 1/4" Door 12'L, 0.813"W Clear Anodized defines this EPCO sliding door hardware as a dedicated track for 1/4 inch bypassing wood and/or glass doors, so it serves typical closet, cabinet, or partition openings using that door thickness. The 12 FT Long length lets installers span wide openings or cut multiple shorter tracks from a single piece to match project dimensions. Its 0.813"W profile sets a consistent footprint for routing or recessing into headers or framing members. The clear anodized finish on the extruded aluminum provides a neutral appearance that coordinates with a broad range of finishes while presenting a clean, finished edge. Being part of EPCO sliding door hardware under Manufacturer Part #38SW14-A and SAP description ALU TRK W/INSERT,1/4IN DR,12FT L,.813INW ties this track to recognized sliding door component standards in the woodworking trade.
For recessed mounting, this EPCO aluminum track is intended to sit into a machined or framed pocket rather than surface-mounting, so the visible edge stays flush with adjacent material. The 0.813"W width gives carpenters and shop crews a fixed value for sizing that recess, helping them cut repeatable channels across multiple openings. Its extruded aluminum body maintains a uniform profile along the 12 FT Long piece, supporting consistent fit from end to end when routing straight pockets. Because the track is designed for 1/4" by-passing wood and/or glass doors, installers can standardize door edge preparation and clearances around this thickness. The black fiber inserts run in the aluminum extrusion, creating a defined sliding path that cushions the doors during operation.
This EPCO Aluminum Track with Insert for 1/4" Door 12'L, 0.813"W Clear Anodized is designated for 1/4" by-passing wood and/or glass doors, so it fits projects where two or more panels slide past each other in a shared opening. In closet, cabinet, or light partition work, this by-passing setup allows one 1/4 inch door to move in front of another on the same opening width. The 12 FT Long length supports wide spans or multiple shorter units cut from one stick, which pairs well with shop-built casework runs using repeating bay sizes. With recessed mounting, the track sits down into a header or framing member so the visible hardware line stays tight to surrounding trim or cabinet parts. The 0.813"W footprint coordinates the channel size with the door thickness, helping align door centerlines for clean reveals as panels slide.
The extruded aluminum construction of this sliding door track keeps the channel shape consistent along its 12-foot length, which supports even door travel when the recess is cut straight and level. Black fiber inserts inside the aluminum create a defined sliding surface between the doors and the metal body, reducing direct metal contact as doors bypass, which benefits finish on both wood and glass edges. Being specified For 1/4" by-passing wood and/or glass doors standardizes the interface, so shops can build a single 1/4 inch door program to work with this track. The 0.813"W dimension gives a precise reference for layout, enabling jigs and stops to be set up for repetitive routing of recessed mounting pockets. As part of EPCO Sliding Door Hardware under Manufacturer Part #38SW14-A, this track integrates into a coordinated system where For use with Upper Guide #48A14-A ties guide positioning directly to this profile.
This EPCO track is for 1/4" by-passing wood and/or glass doors, so it serves sliding installations using that door thickness in either material.
The Aluminum Track with Insert for 1/4" Door is for recessed mounting, so it fits into a routed or framed channel rather than sitting on the surface.
This EPCO extruded aluminum track is 12 FT Long, allowing it to span wide openings or be cut to shorter custom lengths as needed.
The extruded aluminum track is 0.813"W, giving installers a clear dimension for designing recesses and coordinating with surrounding framing or cabinetry.
The black fiber inserts line the aluminum channel, separating door edges from metal and supporting smoother, quieter sliding during bypass operation.
This aluminum track is For use with Upper Guide #48A14-A, so that guide aligns with the track profile in EPCO sliding door hardware layouts.
This EPCO Aluminum Track with Insert for 1/4" Door 12'L, 0.813"W Clear Anodized combines a dedicated 1/4" by-passing wood and/or glass door design with recessed mounting to support clean lines in finished work. Its 12 FT Long extruded aluminum body and black fiber inserts create a stable, low-profile sliding path that fits well in cabinet, closet, and light partition projects using that door thickness. For use with Upper Guide #48A14-A, it ties into an EPCO sliding door hardware system built around 0.813"W track geometry. For 1/4 inch bypass layouts where consistent fit and a flush recess are priorities, this track provides a focused solution.
Sold In: 1 Each