Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3/4 inch sliding upper guide from EPCO manages the top edge of by-passing wood and/or glass doors so the panels track properly, which helps doors move smoothly when you build or service sliding systems. Extruded aluminum construction gives this upper guide a rigid profile that maintains its shape over long spans, which supports clean, straight door travel across the entire opening. The clear anodized finish on the aluminum adds a stable surface treatment that helps the guide resist surface wear in typical interior woodworking environments. A 12 ft overall length lets you span wide openings or cut multiple shorter runs from a single piece, which supports layout flexibility on the job. The 1.938 in width gives you a defined bearing surface for the door tops, providing a consistent channel location when you align the upper guide with the lower track.
For use with 3/4 in by-passing wood and/or glass doors, this EPCO sliding upper guide is built as extruded aluminum so it mounts as a straight, continuous channel above the opening, supporting accurate alignment with the lower sliding hardware. The 12 ft length means you can run a single, uninterrupted guide across most residential or light commercial openings, which helps you avoid joints that could interrupt door travel. Holes at 6 in intervals are spaced to give you consistent fastening locations along the entire guide, supporting even load distribution across the header. The 1.938 in width defines how far the guide projects over the doors, which helps you position the piece so the doors sit correctly in relation to the lower track system.
This EPCO sliding upper guide is specified for 3/4 in by-passing wood and/or glass doors, so it fits typical overlapping door pairs used in closets, room dividers, or cabinet-scale openings where doors slide past each other. The guide is for use with 821-M, 810, 801, or 802 track, tying it directly into those track systems when you build a coordinated sliding assembly. Because the extrusion is 12 ft long, it can handle wide openings in a single run or be cut down for narrower spans, allowing one stock length to serve several layouts in a shop or on site. The 1.938 in wide profile presents a consistent bearing surface along the top of the doors, which supports smooth movement when matched to the specified track hardware. In practice, this combination of defined door thickness, compatible tracks, and generous length helps you standardize parts across multiple sliding door jobs.
The extruded aluminum design of the EPCO sliding upper guide creates a straight, uniform channel, which helps you repeat the same alignment and clearances across multiple installations using the same profile. Holes at 6 in intervals act as built-in layout marks for fastening, so you can hold a regular spacing pattern without separate measuring marks on the material. Being for use with 821-M, 810, 801, or 802 track means the guide is intended to integrate with those track profiles, supporting predictable fit when you stay within that family of components. The 3/4 in by-passing door specification tells you the door thickness this guide is sized around, which matters when you want sliding panels that overlap correctly without rubbing or excessive gap. The 12 ft length and 1.938 in width together provide a known geometry to design around, so once you commit to this profile you can repeat header details, clearances, and door sizing from project to project.
This EPCO sliding upper guide is for 3/4 in by-passing wood and/or glass doors, so it matches common overlapping panel thicknesses used in sliding door installations.
The EPCO sliding upper guide is 12 ft long, allowing a single continuous guide over wide openings or multiple shorter sections cut from one extrusion.
This aluminum upper guide is 1.938 in wide, setting the footprint of the guiding channel and helping define its position over the sliding doors.
This EPCO sliding upper guide is for use with 821-M, 810, 801, or 802 track, so it is intended to coordinate with those sliding track systems.
The upper guide has holes at 6 in intervals along the extrusion, providing regularly spaced points for fastening to the supporting structure.
The EPCO guide is extruded aluminum with a clear anodized finish, giving a rigid profile with a treated surface suited to interior sliding door assemblies.
The EPCO 3/4 inch sliding upper guide in clear anodized extruded aluminum is built for 3/4 in by-passing wood and/or glass doors, so it fits directly into that door style when you construct sliding openings. Its 12 ft length, 1.938 in width, and holes at 6 in intervals define a consistent geometry that supports repeatable header details and secure mounting. When used with 821-M, 810, 801, or 802 track, this guide becomes part of a coordinated sliding hardware layout. Choose this profile when you want a defined, aluminum upper channel that aligns with those track systems and common 3/4 in by-passing door builds.
Sold In: 1 Each