Aluminum Upper Guide for 1/2" Door 12'L, Mill Aluminum

Aluminum Upper Guide For 1/2 In Door Use

aluminum upper guide for 1/2 in door describes an EPCO extruded aluminum guide designed for 1/2 inch bypassing wood and glass doors, so it gives sliding units a controlled top channel that keeps paired doors running in line. The 12 foot length allows long runs for wider openings or multiple door sets in one piece, which minimizes joints that can cause snags in operation. The serrated face creates a defined fascia surface, so the guide can present an attractive visible edge when left exposed at the cabinet or closet front. Holes at 6 inch intervals run along the guide, giving a consistent drilling pattern that speeds layout when fastening to a header or support. Because this guide is built for bypassing doors, it supports overlapping panels that slide past each other rather than swinging on hinges, which helps where floor space in front of the opening is tight.

Sliding Door Guide Details That Support Work

• The extruded aluminum construction provides a uniform profile along the full length, which helps sliding doors track consistently and simplifies trimming or cutting during installation when a shorter section is needed.
• The 12 foot long section offers ample span for closets or wide casework openings, which reduces the number of joints in the run and helps create smoother bypassing door travel across the full width.
• Holes at 6 inch intervals give a regular fastening layout, which saves layout time and helps distribute load evenly into the supporting structure along the guide.
• The serrated face is designed as an attractive finish fascia, which allows the exposed front of the guide to serve as both functional support and a finished trim detail on visible installations.
• Design for 1/2 inch bypassing wood and glass doors focuses the profile on that door thickness range, which helps the guide interface properly with matching sliding assemblies in that category.
• Use with Aluminum Track 312-M and Kerf Track 810, 801, or 802 ties the guide into known track references, which supports consistent system design where upper guidance and lower or side tracking work together.

Upper Guide Fit And Mounting Considerations

This aluminum upper guide is specified for 1/2 inch bypassing wood and glass doors, so it targets installations where that door thickness is part of the sliding system design. The 12 foot length lets installers run a single continuous guide over long openings, then trim to size as needed to match casework or wall dimensions. Holes at 6 inch intervals along the guide establish a predictable fastening rhythm, which supports repeatable mounting when several openings in a project need the same layout. The serrated face is designed as a finish fascia, so the guide can be oriented to present that textured surface toward the room when a visible front edge is desired. Use with Aluminum Track 312-M or Kerf Track 810, 801, or 802 ties the guide into those track styles, giving a defined relationship between the upper guide and the referenced track components.

How This EPCO Guide Works In Practice

Where This Sliding Door Hardware Guide Applies

This EPCO aluminum upper guide is specified for 1/2 inch bypassing wood and glass doors, so it fits projects using that thickness for sliding panels in cabinets, closets, and similar openings that call for bypass action. The product sits in the sliding door hardware class, which places it as a guiding component above the doors rather than as a bottom track. Because it is designed for bypassing doors, it supports layouts where one leaf slides in front of another, maximizing access within a fixed opening width. The 12 foot length supports long spans, which is helpful on wide wardrobe fronts or built-in storage walls where continuous guidance improves alignment. Use with Aluminum Track 312-M or Kerf Track 810, 801, or 802 links this guide to those track designs, making it part of a coordinated sliding system using these specific references.

Details That Support Alignment And Repeatable Results

The extruded aluminum body gives this EPCO guide a consistent cross section, which helps doors ride evenly along the length and supports clean miters or cuts when fitting to custom openings. Holes at 6 inch intervals along the guide establish a regular mounting pattern, so fasteners can be placed in a repeatable grid that shares load and helps resist twisting. The serrated face is intended as a finish fascia, so the guide can act as both a functional channel and as a finished front edge that visually aligns with adjacent trim. Being designed for 1/2 inch bypassing wood and glass doors, the profile geometry is tuned to that application, which supports door clearance relationships in systems built around that thickness. Integration references to Aluminum Track 312-M and Kerf Track 810, 801, or 802 mean the guide is planned to coordinate with those track types, supporting consistent alignment between upper guidance and the associated tracks across repeated installations.

Common Questions About This EPCO Door Guide

Select This Guide For 1/2 In Bypass Doors

This EPCO extruded aluminum upper guide is tailored to 1/2 inch bypassing wood and glass doors, so it fits projects built around that door thickness and style. The 12 foot length, serrated finish fascia, and 6 inch hole spacing support efficient layout on closets, cabinets, and storage runs. Coordination with Aluminum Track 312-M and Kerf Track 810, 801, or 802 makes this guide a defined choice when those track types are part of the sliding system. Use this guide when a continuous upper channel and a finished visible edge align with the requirements of the opening.