Aluminum Track for 1/2" Door 12'L, Mill Aluminum

Aluminum Track For 1/2 In Door Bypass Runs

Aluminum track for 1/2 in door is designed by EPCO as a sliding door hardware component for 1/2 in by-passing wood doors, so it provides the main running surface for a paired door system. The track is extruded aluminum, which creates a consistent profile along the full length for smooth door travel and uniform fit at every hanger position. The track is 12 ft long, giving enough continuous run to handle wide openings or to be cut down for multiple smaller spans on the same job. The mill aluminum finish presents the natural aluminum look, which suits jobs where the track edge is visible and a simple metal appearance is acceptable. This track is part of EPCO sliding door hardware, so it works within a defined system approach for by-passing wood doors.

Sliding Door Track Details That Support Jobs

• The track is specified for 1/2 in by-passing wood doors, aligning the opening width with the intended panel thickness so the doors ride properly in relation to each other.
• Extruded aluminum construction creates a stable, uniform channel profile, supporting consistent door movement along the full length and simplifying alignment during installation.
• The 12 ft long piece covers large spans in a single run, reducing joint points along the opening and allowing custom cutting for multiple shorter tracks on site.
• The mill aluminum finish provides a plain metal appearance, which suits installations where the track face is exposed and a basic fascia look is preferred.
• Holes at 6 in intervals on the track give a regular fastening pattern, helping create even support along the opening when fastening into the supporting structure.
• The serrated face is designed to provide an attractive finish fascia, giving the visible edge a more finished appearance where the track front is in direct view.

Mounting Pattern And Door Glide Compatibility

Holes at 6 in intervals along the EPCO 312-M track establish a predictable mounting rhythm, so fasteners can be placed on a regular grid along the supporting header or structure. The serrated face is designed to provide an attractive finish fascia, giving the visible edge of the track a more finished front where appearance of the sliding door hardware matters. This aluminum track is specified for use with Nylon Button Glide #33 and Plastic Upper Guide #3312-M, so the running and guiding components are defined for this profile and support a coordinated sliding action for 1/2 in by-passing wood doors.

How This EPCO Sliding Track Works In Use

Track For 1/2 In Bypassing Wood Door Installations

This EPCO aluminum track is specified for 1/2 in by-passing wood doors, so it is intended for layouts where one panel slides past another within the same opening. The 12 ft long extruded aluminum profile provides a continuous running surface across wide spans, which supports smooth panel travel from end to end. As sliding door hardware in the Builders Hardware category, this track serves as the primary guiding element above the doors, so the door system depends on this component for alignment and motion.

Being extruded aluminum, the track maintains a consistent internal shape that matches the movement path of the glides, which helps each door panel track the same way along the full length. The mill aluminum finish keeps the surface in its natural metal state, so the fascia edge of the track presents as simple aluminum wherever it remains visible in the finished installation. The product name and description both specify this as an aluminum track for 1/2 in door applications, reinforcing its role in that door thickness range.

Details That Support Repeatable Sliding Door Results

The track is designed for use with Nylon Button Glide #33, so the lower running interface between the glide and the aluminum profile is defined, which helps produce a consistent sliding feel when panels move. It is also specified for Plastic Upper Guide #3312-M, so the upper guiding point is matched to the track design and supports steady panel tracking without wandering. Holes at 6 in intervals give installers a clear fastening pattern to follow along the length, which supports even load distribution from the doors into the structure.

The serrated face is designed to provide an attractive finish fascia, so the visible front edge of the track functions as a modest trim element wherever the track front is exposed. As sliding door hardware under the EPCO brand and identified by manufacturer part 312-M, the track occupies a defined role within a coordinated system of glides and guides for 1/2 in by-passing wood doors. The 12 ft long dimension also supports cutting to specific opening sizes, which allows one standardized part number to serve multiple sliding door widths on a project.

Common Questions About EPCO 312-M Door Track

Select This EPCO Track For 1/2 In Door Runs

The EPCO 312-M aluminum track combines a 12 ft long extruded profile, holes at 6 in intervals, and a serrated mill aluminum face designed to provide an attractive finish fascia for 1/2 in by-passing wood doors. Its defined use with Nylon Button Glide #33 and Plastic Upper Guide #3312-M sets a clear hardware combination for sliding movement and upper guidance. For projects needing sliding door hardware in this thickness and span range, this EPCO aluminum track offers a defined running surface and fascia-ready front edge for by-passing wood door installations.