Aluminum Track for 1/4" Door 12'L, Mill Aluminum

Aluminum Track For 1/4in Door Sliding Runs

Aluminum Track for 1/4in Door defines this EPCO sliding door track as purpose-built for 1/4 inch bypassing wood and/or glass doors, so it supports paired doors that slide past each other in a compact opening. The track is made from extruded aluminum, which creates a consistent profile that works smoothly with matched sliding components over the full length. Its mill aluminum finish leaves the metal in a straightforward, unfinished state, which suits projects where the track will be concealed or field-finished to match surrounding work. At 12 feet long, the track can span wide openings in a single piece, which helps reduce joints that can interrupt door travel. The product sits in the sliding door hardware class, so it is intended as the main running surface in a bypass door assembly.

Sliding Track Details That Support Clean Installs

• The track is designed for 1/4 inch bypassing wood and/or glass doors, which defines the door thickness and door type this profile is built to carry in typical sliding cabinet or passage applications.
• Its extruded aluminum construction delivers a uniform internal channel shape, which helps matched rollers or guides track consistently along the full 12 foot run without unexpected tight or loose spots.
• The serrated face is designed to provide an attractive finish fascia, so the exposed front edge presents a more finished look when the track is visible along the cabinet or opening.
• Holes at 6 inch intervals are formed in the track, giving repeated, regular mounting points that help install the rail straight and supported along its full length with predictable fastener spacing.
• The 12 foot overall length allows long openings to be covered in one continuous piece, which avoids mid-span breaks that can interrupt smooth bypass door travel during everyday use.

Track Layout, Mounting Pattern, And Door Alignment

This EPCO sliding door track incorporates holes at 6 inch intervals, so installers have a clear pattern for setting fasteners along the run and keeping the track aligned with the cabinet or wall substrate. Because the track is specified for 1/4 inch bypassing doors, it is intended to be laid out so that two doors share the opening and slide past one another on the same run. The serrated face functions as a finished fascia surface, so orientation during mounting can be chosen to present that face toward the room side where appearance matters. Its 12 foot length supports layouts where a single piece carries both doors, helping keep their alignment consistent from end to end.

Using This 12 Foot EPCO Sliding Door Track

Where This Aluminum Track Is Applied

This EPCO aluminum track is specified for 1/4 inch bypassing wood and/or glass doors, so it is suited to sliding setups where two thin doors share an opening and travel past each other. The builders hardware and sliding door hardware classification places it in typical cabinet, closet, or similar door applications where a linear upper track carries the moving panels. Its 12 foot length supports wider spans often found in multi-door runs or longer openings, allowing both wood and glass panels of the same 1/4 inch thickness to operate on a continuous track. The serrated face is designed as an attractive finish fascia, which suits installations where the front of the track remains visible and must present a clean, consistent line.

Details That Support Smooth Bypassing Movement

The extruded aluminum construction provides a consistent internal track profile, which helps compatible hanger or guide hardware move smoothly without catching along the 12 foot length. Holes at 6 inch intervals give repeated mounting points, so the track can be fastened at regular spacing to limit sag and keep the running surface straight for bypassing doors. Because the track is built for 1/4 inch wood and/or glass doors, the geometry is matched to that door thickness, supporting clearances that suit typical bypass sliding hardware. The serrated face acting as a finish fascia helps maintain a uniform visual line along the opening, which is important when both doors slide fully open or closed and expose more of the track to view.

Common Questions About This EPCO Sliding Track

Select This Track For 1/4in Bypassing Door Runs

This EPCO extruded aluminum sliding track combines a 12 foot length, 1/4 inch door design, and holes at 6 inch intervals to support straightforward layout across wider openings. The serrated face provides a finished fascia where the front edge remains visible. Its use with Aluminum Upper Guide 3314-M places it within a coordinated sliding hardware system. For projects using 1/4 inch bypassing wood and/or glass doors, this track supplies the defined running surface needed to complete a smooth sliding assembly.