Aluminum Track for 3/4" Door 12'L, Mill Aluminum

Aluminum Track For 3/4" Door Sliding Runs

Aluminum Track for 3/4" Door is an EPCO sliding door track designed for 3/4 inch bypassing wood doors, so it creates a defined path when two doors share the same opening and slide past each other. The track is specified at 12 feet long, giving installers a continuous run for wide openings without breaking the line of travel. Its extruded aluminum construction forms a consistent profile, which supports smoother door movement across the full length. The mill aluminum finish keeps the material in its natural state, which suits projects where raw aluminum edges into a fascia or trim detail. The track is identified by manufacturer part number 334-M, helping match it to layouts that call for this specific EPCO sliding door hardware component.

Sliding Track Details That Support Door Projects

• The track is designed for 3/4 inch bypassing wood doors, so it fits door thicknesses commonly used in closet and cabinet openings where two panels share a single header.
• Extruded aluminum construction creates a uniform channel profile, which helps doors travel along a consistent path for more predictable sliding action over time.
• The 12 foot length provides a long, continuous run that spans wider openings, reducing the need to align multiple shorter tracks in a straight line.
• Holes at 6 inch intervals give a regular mounting pattern, helping installers space fasteners evenly along the header or support structure for balanced support.
• The serrated face is designed to provide an attractive finish fascia, so exposed track edges present a textured appearance that integrates into finished trim work.
• The track is branded EPCO sliding door hardware, which ties it to a defined product class for matching with related glides and guides in the same system.

Track Mounting And Fit For Sliding Door Runs

This extruded aluminum sliding track is described as sliding door hardware for 3/4 inch bypassing wood doors, so it is intended to mount where two wood panels slide past each other along a shared opening. The 12 foot length means it can cover long header spans in a single piece, which simplifies layout when positioning the track relative to the door edges. Holes at 6 inch intervals run along the track, setting a regular pattern for fastening to the supporting structure and helping keep the profile aligned along its length. The serrated face forms an attractive finish fascia, so when the track face is visible it presents a defined textured line above the doors.

Using This EPCO Sliding Door Track In Projects

Where This Aluminum Track For 3/4" Door Fits

This EPCO sliding door hardware track is specified for 3/4 inch bypassing wood doors, so it fits projects where two wood doors overlap and slide on parallel paths in the same opening. The track belongs to the sliding door hardware product class, aligning it with applications such as wood door runs that require guided motion along a fixed header line. The 12 foot long extruded aluminum profile suits installations that need an extended straight channel, such as wide spans that benefit from a single continuous track section. Its serrated face is designed to provide an attractive finish fascia, so the visible front edge of the track can act as a finished trim element along the door top line.

The track is described for use with Nylon Button Glide #33 and Upper Guide #3334-M, so it functions as the running surface and guide channel that these specific components engage. That relationship means the track works as part of a coordinated system, with the nylon button glide and upper guide interacting with the extruded aluminum profile to direct door movement. Within the builders hardware and sliding door hardware category, this track serves as a structural guide element that defines where 3/4 inch bypassing wood doors travel and how they align along the opening.

How Track Length, Holes, And Face Aid Results

The 12 foot length of this extruded aluminum sliding track reduces the number of joints across a wide span, which supports straighter alignment for the sliding doors over the full opening. When the track runs in a single piece, the doors encounter a continuous surface, which helps keep travel uniform from end to end. Holes at 6 inch intervals set a clear fastening rhythm, so each segment of the track can be supported at regular distances along the mounting surface, distributing support along the extrusion. That consistent hole spacing assists with laying out attachment points in relation to framing or structural members.

The serrated face is designed to provide an attractive finish fascia, and that textured face also defines a consistent visual edge above the doors once the hardware is in place. Because the track is made from extruded aluminum in a mill aluminum finish, the material presents a clean metal line that coordinates with other exposed aluminum elements in a sliding door assembly. Working together, the defined door application, consistent length, regular hole spacing, and serrated face allow this EPCO track to support practical sliding door alignment while also contributing to the finished appearance of the opening.

Common Questions About This Sliding Door Track

Select This Track For 3/4" Door Runs

Choose the Aluminum Track for 3/4" Door 12 foot length when a sliding door hardware run calls for an EPCO extruded aluminum profile sized for 3/4 inch bypassing wood doors. The defined relationship to Nylon Button Glide #33 and Upper Guide #3334-M ties this 334-M track to a coordinated sliding system. With its 12 foot continuous length, holes at 6 inch intervals, and serrated face designed as an attractive finish fascia, this mill aluminum track supports both the mechanical travel and the finished appearance of the opening.