Strike Plate for Glass Door is an EPCO strike in the Strikes product class, so it is built for the closing point of a lock or latch rather than general glass hardware. It is described as a wrap around strike plate with lip, which positions the contact surface where the latch needs to meet the glass edge for consistent engagement. The strike is listed under Locks and Latches|Lock Accessories, so it is intended to work as part of a latch assembly instead of acting as a primary lock. The plate is supplied for 1/4 inch and 3/16 inch glass, so it addresses two common glass thicknesses in one solution when sizing glass cabinet or showcase doors. The EPCO manufacturer part number 516-PB ties this strike to a defined pattern, helping keep replacement work consistent across similar projects.
The stated 39mm length and 23mm height describe the overall strike plate envelope, which helps position the wrap around strike along the glass edge in relation to the cabinet frame or case. Being for 1/4 inch and 3/16 inch glass means the forming of the wrap is sized around these thicknesses, which keeps the strike located correctly on these glass sizes. Because it is a wrap around strike plate with lip, the lip portion provides the landing surface for the touch latch, which contributes to consistent depth when positioning latch bodies relative to the glass edge. All of these dimensions work together so the strike can be located predictably wherever these glass thicknesses and touch latches are used.
This EPCO Strike Plate for Glass Door is described for use with 507, 508, 512, 513, 514-BL-PWS and 515-BL-PWS touch latches, so it is tailored to those specific latch bodies. That means when a project calls out one of these touch latches on a 1/4 inch or 3/16 inch glass door, this strike serves as the glass-side counterpart. The wrap around form allows the plate to grip the edge of the glass while positioning the lip to meet the chosen touch latch. Because it belongs to the Locks and Latches category under Lock Accessories, it fits into hardware layouts where the touch latch handles the holding force and the strike focuses on giving the latch a clean, repeatable point of contact. This keeps the glass panel actuation tied directly to the defined EPCO latch series.
The specified 39mm length and 23mm height give the strike a compact but defined footprint, which keeps the working area small while still giving the latch a generous landing zone. Being intended for 1/4 inch and 3/16 inch glass means the fit around the edge is matched to those sizes, which supports stable positioning over time on those door thicknesses. The description notes a stick-on cushion, which adds a layer at the point where the latch meets the strike, helping soften the impact as the touch latch engages and disengages. That cushioning can moderate contact between the latch and glass-mounted strike, supporting quieter operation in cabinets and showcases that see frequent opening and closing. Together, the geometry and cushion help the touch latch and glass panel interact in a controlled, repeatable way.
The Strike Plate for Glass Door is described for 1/4 inch and 3/16 inch glass, so it is sized to clamp and locate correctly on those common glass door thicknesses.
The strike plate is described for use with EPCO 507, 508, 512, 513, 514-BL-PWS and 515-BL-PWS touch latches, so it pairs with those latch bodies on glass doors.
The 39mm length and 23mm height define a compact strike area, helping position the latch contact in a predictable zone on the glass door edge.
The strike plate is described as polybagged with stick-on cushion, which provides a cushioned contact surface to soften touch latch engagement against the glass-mounted strike.
Wrap around strike plate with lip means the plate wraps the glass edge while the lip forms the latch contact point, helping keep engagement aligned along the door edge.
EPCO 516-PB uniquely identifies this strike plate, so matching that part number helps repeat the same strike geometry on future glass door projects.
The Strike Plate for Glass Door is an EPCO 516-PB wrap around strike plate with lip, built for 1/4 inch and 3/16 inch glass. Its 39mm length and 23mm height provide a defined latch contact area sized around those glass thicknesses. Being described for use with EPCO 507, 508, 512, 513, 514-BL-PWS and 515-BL-PWS touch latches, it ties directly into those latch choices on glass cabinet or showcase doors. When a project calls for those EPCO touch latches on glass, selecting this strike keeps the glass edge interface and latch engagement consistent from door to door.
Sold In: 1 Each