Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
wrap around strike plate with lip polished chrome is an EPCO strike from the Locks and Latches, Lock Accessories category, so it serves as the matching strike point that a touch latch grabs for consistent door holding on suitable installations. The strike is designed as a wrap around style for glass, which means it grips around the edge of the glass panel to create a defined stop surface without drilling into the glass itself. It is described for 1/4 inch and 3/16 inch glass, so it is sized for these common cabinet glass thicknesses, allowing installers to select it where those thicknesses are used in doors or panels. The part measures 39mm in length and 23mm in height, giving a compact strike area that stays close to the latch centerline for predictable engagement. The polished chrome finish provides a bright appearance that matches polished chrome hardware lines and keeps the strike visually consistent with other EPCO components.
This EPCO wrap around strike plate is described specifically for 1/4 inch and 3/16 inch glass, so its formed channel is sized to capture these two glass thicknesses without excess play when clamped in position. With a 39mm length along the glass edge, the strike provides enough bearing surface for stable placement while still fitting typical glass cabinet door proportions. The 23mm height gives a defined lip that presents a consistent surface to the touch latch, which supports predictable latch engagement along the door edge. The stick-on cushion mentioned in the description adds a soft interface point, which can reduce impact where the door edge or strike area meets adjacent cabinet framing.
The web description states that this wrap around strike plate is for use with EPCO touch latches 507, 508, 512, 513, 514-BL-PWS and 515-BL-PWS, so it is matched to the working geometry of these latch bodies for proper engagement. Because it is designed for 1/4 inch and 3/16 inch glass, the strike can be fitted to glass doors or panels that work with those EPCO touch latch models in display cabinets, cupboards, or similar installations using those thicknesses. As part of the Locks and Latches, Lock Accessories category, the strike functions as the glass-mounted counterpart to the cabinet-mounted touch latch, allowing the latch roller or plunger to contact a dedicated metal edge instead of the glass. The polished chrome finish aligns with polished chrome latch finishes from EPCO, which keeps latch heads and strikes visually coordinated across a job.
The 39mm length of this EPCO 516-PC strike plate runs along the edge of the glass, so it creates a longer contact zone where the touch latch meets the strike, helping the latch find the plate even with small alignment variances during installation. The 23mm height provides a defined lip the latch can catch, which supports firm holding when the door is closed and a clear release line when the touch latch is pushed. The wrap around design places metal on both sides of the glass edge, creating a U-shaped grip that distributes forces on the glass surface instead of concentrating them in a single point. The stick-on cushion mentioned in the description adds a compressible contact element at the strike area, which can reduce noise and direct glass-to-wood or glass-to-metal contact when the door is brought to the closed position against the cabinet structure.
The EPCO 516-PC wrap around strike plate is described for 1/4 inch and 3/16 inch glass, so it is sized to grip those glass thicknesses on door or panel edges.
This wrap around strike plate is described for use with EPCO touch latches 507, 508, 512, 513, 514-BL-PWS and 515-BL-PWS, aligning the strike geometry with those latch models.
The 39mm length and 23mm height keep the strike compact on the glass edge while still providing a defined lip and contact area for consistent touch latch engagement.
The wrap around design places metal on both sides of the glass edge, so the strike spreads forces across the glass and creates a stable gripping area for latching.
The strike sits in the Locks and Latches, Lock Accessories category because it functions as the receiving surface that paired EPCO touch latches engage on glass doors.
The strike is described as polybagged with stick-on cushion, giving a soft contact element that can reduce impact and noise where the glass edge meets adjacent structures.
The EPCO wrap around strike plate with lip polished chrome, part 516-PC, is specified for 1/4 inch and 3/16 inch glass and for use with EPCO touch latches 507, 508, 512, 513, 514-BL-PWS and 515-BL-PWS, so it aligns with those latch bodies on glass cabinet doors. With 39mm length, 23mm height, and a wrap around profile, it creates a defined, compact contact area that supports clean latching on glass edges. For projects built around those EPCO touch latch models and these glass thicknesses, this strike plate provides the matched glass-mounted partner to complete the latch setup.
Sold In: 1 Each