Shelf Support w/1/4" Pin Bright Brass is an EPCO shelf support designed to carry cabinet or closet shelves using a defined 1/4 inch pin interface. The 1/4 inch pin engages a matching hole so the support locates consistently along cabinet sides. That fixed interface helps create level runs of shelving when multiple supports are used at the same height. The stamped steel construction forms a rigid support body that resists deformation under normal cabinet loads. That stable form helps maintain shelf alignment over time. The bright brass finish provides a brass-colored appearance on the visible portion of the support. That consistent finish helps the support visually coordinate with brass-toned hinges, pulls, or hanging rods in the same project. The EPCO 520-B part number identifies this specific combination of 1/4 inch pin, stamped steel construction, and bright brass finish for repeat jobs.
The 1/4 inch pin detail on the EPCO 520-B shelf support defines the required hole diameter for cabinet or closet side panels. That dimension lets the installer drill straight 1/4 inch rows and know the support will seat properly. The pin engages the hole to position the stamped steel support at a fixed projection from the cabinet side, which helps keep shelf edges aligned front to back. The bright brass portion remains at the front where it can be seen, while the 1/4 inch pin stays buried in the panel. That relationship between visible brass and hidden pin gives a finished look at the front edge while the mechanical engagement occurs inside the drilled hole.
The EPCO 520-B shelf support belongs in the Shelf, Closet & Garage Organization category under Shelf Supports, which places it directly in cabinet and storage applications. The 1/4 inch pin sizing works with systems that rely on 1/4 inch shelf pin holes in cabinet or closet sides. That lets installers use the same drilling pattern across banks of cabinets and then drop in these supports at the desired heights. The stamped steel construction suits interior cabinet environments where metal supports are standard practice. In closets, the bright brass finish can align with brass rods or hooks so the supports read as part of the same hardware family. In garage or utility storage, the defined 1/4 inch pin interface allows adjustable shelving within cabinets using familiar drilling equipment.
The stamped steel design of the EPCO 520-B shelf support creates a repeatable shape from part to part, which supports even contact under the shelf corners. That uniform bearing helps limit rocking or point loading at one support. The 1/4 inch pin dimension makes the drilling operation straightforward, since standard 1/4 inch bits correspond directly to the pin size. That alignment between bit and pin reduces guesswork when laying out shelf rows on site or in the shop. The bright brass finish presents a consistent brass color at each support position, which helps finished cabinetry look coordinated when doors are opened. The manufacturer part number 520-B ties all of these characteristics together so ordering, stocking, and field installation point to the same stamped steel, bright brass, 1/4 inch pin shelf support every time.
The EPCO 520-B is a shelf support classified under Shelf Supports, so it is used to hold shelving in cabinet, closet, or similar storage applications.
The EPCO 520-B shelf support uses a 1/4 inch pin, which sets the drilling diameter for the panel holes that hold the support in place.
The Epco 520-B shelf support is made from stamped steel, providing a formed metal body to carry the weight of typical cabinet or closet shelves.
The 520-B shelf support has a bright brass finish, giving the visible portion a brass-colored appearance that can coordinate with other brass hardware.
The Web Description states "Packing & Sold In: Each.", meaning the EPCO 520-B shelf support is handled on an each basis for ordering.
The Web Description lists "0.75"L", indicating the shelf support has a 0.75 inch length dimension that defines how far the stamped steel body extends from the pin.
The EPCO Shelf Support w/1/4" Pin Bright Brass - Epco 520-B combines a 1/4 inch pin, stamped steel construction, and bright brass finish in one defined part. That combination lets cabinet, closet, and storage builders standardize on a single shelf support specification. The SAP description and manufacturer part number keep purchasing and field use aligned, from ordering through installation. For projects built around 1/4 inch shelf pin systems with a brass-color interior hardware theme, this EPCO 520-B shelf support matches that requirement and supports repeatable cabinet and closet layouts.
Sold In: 1 Each