Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Shelf Supports w/1/4" Pin Vinyl Covered gives you a stamped steel support with a 1/4" pin that locates solidly in standard drilled holes for dependable shelf bearing. The vinyl covered surface sits between the stamped steel support and the shelf material, which helps protect the shelf edge during loading and unloading. The bright nickel finish on the visible portion of the support presents a clean, metallic appearance that suits typical cabinet and closet interiors. As part of the Shelf, Closet & Garage Organization family, this support works as a small but critical bearing point in cabinet layouts where multiple adjustable shelf positions are drilled. The EPCO branding and the EPCO 521-N manufacturer part number tie directly to a repeatable specification, so installers can match this support across jobs.
This Shelf Supports w/1/4" Pin Vinyl Covered, Bright Nickel - Epco 521-N uses a 1/4" pin, so it presses into 1/4" diameter holes commonly drilled for adjustable shelving layouts in cabinetry and closets. That matching dimension keeps installation straightforward when rows of 1/4" system holes are already bored in gables or uprights. The stamped steel support section then projects from the hole to carry the shelf edge, creating a repeatable bearing point at every location where a pin is installed. The vinyl covered area over the support arm cushions contact with shelf material, which is useful when shelves are slid forward, removed, or reset at a new height. The bright nickel portion remains visible inside the cabinet, supporting a consistent interior look wherever these supports are used.
The EPCO Shelf Supports w/1/4" Pin Vinyl Covered, Bright Nickel - Epco 521-N is identified as a Shelf Support in the Shelf, Closet & Garage Organization category, so it serves in cabinets, closets, and similar storage layouts that rely on adjustable shelving. Its 1/4" pin size matches 1/4" holes commonly drilled in furniture panels, allowing this single support type to serve multiple shelf positions across a cabinet run. Because the pin is integral to the stamped steel design, each support both locates in the panel and carries the shelf edge at the same point, which simplifies setting up rows of supports. The bright nickel surface on the visible portion aligns well with storage interiors that also use bright nickel-finished hardware on other components in the same line of cabinetry.
The stamped steel construction described in the product data provides a strong, thin profile for the EPCO 521-N support, letting it carry shelf loads while occupying minimal space under the shelf edge. This geometry helps keep the underside of the shelf relatively clear, which is useful when loading or cleaning. The vinyl covered area on the support offers a more forgiving contact surface than bare steel, reducing the chance of marking the shelf underside during movement. That detail is particularly helpful in Shelf, Closet & Garage Organization projects where shelves may be repositioned over time as storage needs change. The bright nickel finish on the exposed steel aligns with other bright nickel elements in cabinetry, giving designers and installers a consistent visual language while relying on the same EPCO 521-N specification from project to project.
The EPCO 521-N Shelf Supports w/1/4" Pin Vinyl Covered uses a 1/4" pin, so it fits 1/4"-diameter holes in cabinet and closet panels for adjustable shelving layouts.
The Shelf Supports w/1/4" Pin Vinyl Covered use a vinyl covered support area that cushions between stamped steel and the shelf underside, helping limit marring as shelves are moved.
The EPCO 521-N stamped steel construction forms a rigid support body, giving the shelf a solid bearing point in typical Shelf, Closet & Garage Organization projects.
The EPCO Shelf Supports w/1/4" Pin Vinyl Covered are classified under Shelf, Closet & Garage Organization | Shelf Supports, so they serve in storage and organization shelving layouts.
The Shelf Supports w/1/4" Pin Vinyl Covered, Bright Nickel - Epco 521-N use a bright nickel finish on the exposed area, aligning with bright nickel cabinet interiors.
The EPCO 521-N manufacturer part number, also listed as 521-N, ties the shelf support to a specific design so installers can repeat the same component on multiple jobs.
The Shelf Supports w/1/4" Pin Vinyl Covered, Bright Nickel - Epco 521-N combines a 1/4" locating pin, stamped steel body, and vinyl covered support surface to carry shelves in adjustable systems. Its bright nickel finish coordinates with other bright nickel hardware in Shelf, Closet & Garage Organization layouts. Using the EPCO 521-N part number from Wurth Baer Supply keeps your shelf support choice consistent across cabinets, closets, and storage runs that all rely on the same 1/4" hole system.
Sold In: 1 Each