Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Epco 524-N shelf support uses a 1/4 inch pin to hold shelving in cabinets, closets, or garage storage panels drilled for that pin size, so the pin engages cleanly in the hole and carries the load at a defined point. This shelf spoon support is part of the shelf, closet and garage organization class of shelf supports, so it is suited to typical built-in storage projects where multiple adjustable shelves share the same hardware style. The stamped steel construction forms the spoon shape and the pin as a single piece, which gives a consistent bearing surface for the shelf edge and a uniform pin diameter for drilled holes. The bright nickel finish covers the exposed portion of the support, so the hardware presents a clean metallic look on open cabinet interiors or closet systems.
The 1/4 inch pin on this EPCO shelf spoon support is designed for panels drilled with 1/4 inch diameter holes, so the pin fills the bore and lets the cabinet side carry the shelf load at that location. The stamped steel construction keeps the pin diameter consistent along its length, so the support slides smoothly into properly drilled holes during assembly without binding from irregular shapes. The 0.875 inch length applies to the stamped steel portion, so the projecting spoon section offers a predictable bearing surface under the shelf while the pin length engages inside the panel. The bright nickel finish defines the exposed appearance during installation, so when the supports are set at matching heights they present a coordinated line along the cabinet interior.
This EPCO shelf spoon with 1/4 inch pin is classified under shelf, closet and garage organization shelf supports, so it is suited to cabinets, closets, and similar storage runs that rely on drilled side panels for adjustable shelving. The 1/4 inch pin dimension matches 1/4 inch hole drilling patterns, so once the panel rows are bored at that size the same part number 524-N can be set at multiple elevations to carry shelves along a run. The spoon portion formed from stamped steel extends from the pin, so the flat upper surface supports the underside of typical shelving at a consistent height relative to the drill line, helping align shelves across opposing cabinet sides. The bright nickel finish shows on the exposed face of the spoon, so in open shelving or glass-door cabinets the hardware keeps a uniform color tone along each row of supports.
The stamped steel construction of the Epco 524-N shelf support shapes both the 1/4 inch pin and the spoon in a controlled form, so each piece shares the same geometry and gives repeatable positioning from one support to the next. The 0.875 inch stamped length defines how far the spoon structure extends from the mounting point, so shelves rest at a known offset from the cabinet side and can be cut to match that clearance in a run of units. The bright nickel finish on the support surface keeps the contact area between the shelf underside and the spoon smooth, so shelves seat consistently when moved between different hole locations. The product class as a shelf support for shelf, closet and garage organization connects this part directly to typical woodworking and storage layouts, so using the same EPCO 524-N reference across a project helps maintain uniform hardware style and pin sizing wherever adjustable shelving is required.
The Epco 524-N is a shelf spoon support with a 1/4 inch pin, so it is used as a shelf support point in cabinet, closet, or garage organization projects that use drilled side panels.
The 1/4 inch pin on this stamped steel support fits 1/4 inch diameter holes, so it seats securely in matching bores and positions the spoon to carry the shelf edge at that drill height.
The 0.875 inch dimension describes the stamped steel length of the shelf spoon body, so installers know the approximate projection that will support the underside of the shelf panel.
The bright nickel finish defines the visible surface of the shelf support, so it presents a clean metallic look that coordinates with other bright nickel hardware on the same installation.
The Epco 524-N shelf spoon is made from stamped steel, so the pin and spoon shape form a rigid piece that transfers shelf load into the cabinet side panel.
This shelf support belongs to the shelf, closet and garage organization class, so it is typically used in cabinets, closet systems, and garage storage with drilled adjustable shelving.
The Epco 524-N stamped steel shelf spoon with 1/4 inch pin and bright nickel finish is defined as a shelf support for shelf, closet and garage organization, so it suits projects built around 1/4 inch drilled holes and matching shelf layouts. Using this single manufacturer part number 524-N for those locations keeps the pin size, spoon projection, and visible finish consistent wherever adjustable shelving is needed across cabinets, closets, or garage storage runs.
Sold In: 1 Each