Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3/4 inch x 48 inch sliding track describes an EPCO high impact, extruded polystyrene track and guide system, so installers get a matched upper guide and track sized for typical 3/4 inch doors over a 4 ft run. The system is recommended for small and light 3/4 inch doors, which fits applications where compact panels need controlled movement without heavy-duty hardware. Four nylon button glides provide a smooth sliding action, so doors travel quietly and predictably along the opening. The gray finish on the plastic track presents a neutral appearance that fits many cabinet or casework interiors. The track and guide system is classified as sliding door hardware, so it integrates into woodworking and cabinet projects that need simple lateral door movement. EPCO branding identifies the system within common builders hardware lines, helping shops align this kit with existing EPCO sliding solutions.
The high impact, extruded polystyrene construction sets the character of the mounting channel, so the track supports repeated sliding motion of small and light 3/4 inch doors. The 48 inch length provides continuous guidance across a 4 ft span, matching common cabinet and casework openings. Four nylon button glides manage the door contact surfaces, maintaining a defined running interface between door edge and track for repeatable travel. The gray finish on the plastic track supports visual alignment during layout because the lighter tone contrasts with many substrates. The EPCO sliding door hardware classification aligns this track and guide system with typical sliding door mounting approaches in woodworking projects. The product name and dimensions focus its use where 3/4 inch doors and a 4 ft track length are part of the design.
The polystyrene sliding track kit is described as a high impact, extruded polystyrene track and guide system, so it functions as a coordinated path for small and light 3/4 inch doors. The 3/4 inch callout in the description points to doors built around that thickness, aligning the running surfaces of the track and guide with typical cabinet door construction. Being recommended for small and light 3/4 inch doors, the system targets enclosures where panel size and weight remain modest, such as upper cabinets or light-duty casework. The 48 inch, or 4 ft, length supports doors that need to travel across medium-width openings, letting one continuous track manage the full slide. The EPCO brand and sliding door hardware category position this kit as a component within builders hardware assortments used by woodworking shops and serious DIY users.
The track and guide system description states that it uses four nylon button glides to provide a smooth sliding action, so the door edges interact with low-friction contact points instead of dragging along raw plastic surfaces. These four glides distribute contact along the door movement path, which helps maintain more even support where small and light 3/4 inch doors travel. The mention of Plastic Upper guide #2234 identifies the component that stabilizes the door from above, keeping the panel aligned as it moves laterally. Plastic Track #234 defines the running channel, giving installers a named lower track to receive the glides and support consistent travel. The system length of 4 ft ties these components into a single sliding path sized for many cabinet and casework openings.
The sliding track and guide system is recommended for small and light 3/4 inch doors, so it suits compact panels where modest weight matches the intended sliding performance.
The EPCO track and guide system is 4 ft, or 48 inches, long, giving a continuous sliding path for doors that travel across medium-width cabinet or casework openings.
The track and guide system uses high impact, extruded polystyrene for the main components and four nylon button glides, combining a plastic channel with low-friction glide points for movement.
The four nylon button glides provide a smooth sliding action by reducing friction between the door and track, so doors move more easily along the sliding path.
Plastic Upper guide 2234 acts as the upper guiding component in the system, helping keep small and light 3/4 inch doors aligned as they slide laterally.
Plastic Track 234 forms the primary sliding channel for the doors and glides, defining the path across the 4 ft length where small and light 3/4 inch doors move.
The EPCO 3/4 inch x 48 inch sliding track and guide system uses high impact, extruded polystyrene with four nylon button glides, so small and light 3/4 inch doors gain a defined, smooth path. With Plastic Upper guide 2234 and Plastic Track 234, the kit establishes a matched channel for lateral movement over a 4 ft span. For cabinet and woodworking projects needing a compact sliding route for 3/4 inch doors, this gray finish track system from Wurth Baer Supply supports straightforward planning around a known length and door thickness.
Sold In: 1 Each
