Plastic Track Kit No. 5 for 3/4" Door 4' L, White

Plastic Track Kit No. 5 For Small Sliding Doors

Plastic Track Kit No. 5 gives you a matched EPCO track and guide system for sliding doors built from 3/4 inch material, so you can plan clearances and layout with a known interface. The kit uses high impact, extruded polystyrene track, which provides a rigid, consistent channel that supports repeatable sliding motion for light door panels. It is recommended for small and/or light 3/4 inch doors, aligning the track geometry and glide design with lighter-duty cabinet or closet applications. The system is supplied in a 4 foot length, letting you span typical cabinet or short passage openings in one run without cutting and joining multiple shorter tracks. A white finish on the plastic components presents a neutral look that blends into light casework interiors, helping the hardware recede visually while the door remains the focus during use.

Sliding Door Track Details That Support Workflow

• The high impact, extruded polystyrene track provides a stable sliding channel, which helps the door travel predictably along its path and supports consistent performance over repeated cycles in light-duty situations.
• Recommendation for small and/or light 3/4 inch doors focuses this EPCO sliding door hardware on cabinet-style or similar openings, which helps you match the track strength and glide design to doors that do not require heavy-duty metal components.
• The 4 foot length of the track allows a continuous run along many standard cabinet or niche widths, which reduces field joints along the slide path and supports smoother movement where the door transitions past the midpoint.
• Four nylon button glides provide the sliding action, so the door rides on low-friction contact points that promote easier movement and help reduce drag between the 3/4 inch door edge and the polystyrene track channel during everyday operation.
• The white color of the plastic components offers a light, neutral appearance, which helps the track and guide visually blend with white or light-toned cabinets so the visible focus stays on the door design rather than the hardware.

Installation Use Of EPCO Sliding Door Hardware

This EPCO sliding door hardware centers around a plastic track kit for 3/4 inch door material, giving you a defined thickness target when laying out the door edge and glide positions. The 4 foot plastic door track kit length simplifies cutting to a specific opening size, because most cabinet span dimensions fall at or under this measure. High impact, extruded polystyrene construction tolerates typical cabinet handling during fitting, which supports on-site trimming and drilling where needed along the track body. The system uses four nylon button glides to create the sliding interface, so mounting locations can be planned around those discrete contact points along the door edge. A white finish on the track and guide coordinates well with light interiors, which is useful when routing recesses or clearances that leave the components partially visible in the completed installation.

Where This Plastic Track Kit No. 5 Fits Best

Sliding Door Track Kit For 3/4 Inch Doors

This plastic track kit for 3/4 inch door construction is designed around EPCO part number 5-WH-4, tying the track and guide sizing to common cabinet door thicknesses. The recommendation for small and/or light 3/4 inch doors directs this sliding door hardware toward upper cabinets, small closets, or light partitions where panel weight remains modest. A 4 foot plastic door track kit length works well across many cabinet widths or built-in openings, allowing you to center the door path within the frame while leaving trim margins at each end. Because the track is made from high impact, extruded polystyrene, it supports the sliding loads typical of light-duty doors without relying on heavier metal profiles, which can be useful when weight at the cabinet top rail is a concern in a project.

Track And Guide Details For Smooth Sliding Action

The high impact, extruded polystyrene track in this EPCO sliding door hardware forms a smooth, uniform channel, which supports even guidance for the door edge along the entire travel distance. Four nylon button glides provide the smooth sliding action, creating defined contact points that limit surface area and reduce friction between the door and the track. That combination allows the door to move more easily under hand force, which can help cabinetry feel more refined in everyday use. The plastic upper guide #2234 is part of the system, aligning the top of the door within the opening so the panel tracks correctly along the polystyrene channel. The plastic track #234 partners with that guide, forming a matched pair that supports both alignment and sliding motion along a coordinated geometry. Together, these elements create a sliding doorway path tailored to small and light 3/4 inch doors in cabinet or similar settings.

Common Questions About EPCO Sliding Door Track

Select This Track Kit For 3/4 Inch Sliding Doors

The EPCO 5-WH-4 plastic track kit for 3/4 inch door applications gives you a defined system tailored to small and/or light doors, reducing guesswork when choosing sliding components. High impact, extruded polystyrene track and four nylon button glides work together to support smooth sliding action along the 4 foot length. With matching Plastic Upper Guide #2234 and Plastic Track #234 in a white finish, the hardware aligns visually and functionally with light cabinetry. For projects built around 3/4 inch sliding doors, this EPCO sliding door hardware offers a focused track and guide solution that fits the material thickness and use profile.