Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Upper Guide for 710-A Track defines this EPCO component as a dedicated upper guide for installations that use the 710-A track base or need greater depth at the top of a sliding assembly. The specified use as an upper guide focuses this part on stabilizing the door at the top edge, which supports smoother motion and consistent tracking in sliding door runs. EPCO branding ties the guide to the manufacturer's 710-A system, which helps align part selection with track layout and hardware standards on the job. The 1.188 inch width gives a defined bearing surface at the upper edge, which matters when matching guide width to track profile and door design. The guide design is intended for sliding door hardware applications, fitting into builders hardware workflows where repeatable door travel is required along the 710-A track base.
The 12 FT long aluminum construction means the guide spans substantial openings in one continuous run, which supports layouts where a single-piece upper guide is preferred across the top of the sliding door assembly. The 1.188 inch width establishes a fixed dimension for aligning the guide relative to the 710-A track base, which matters when setting out the track location and door plane in relation to adjacent framing or panels. Extruded aluminum defines the guide body, giving a consistent profile that supports predictable engagement with the 710-A track base along the full length. The satin clear anodized surface on the aluminum provides a finished look that coordinates with typical sliding door hardware, which can help align visual details across multiple openings on the same project.
This EPCO upper guide is specified for use when a 710-A track base is part of the sliding door layout, so it fits into systems that rely on that particular base profile for top travel. The guide is used as an upper guide in sliding door hardware applications, placing it at the top of the door path where it can engage with the 710-A track base along the full 12 FT length. Builders hardware and sliding door hardware classification positions this guide within assemblies for doors that require linear movement rather than swinging, which keeps its role focused on upper tracking duty. The 1.188 inch width works as a fixed design parameter for positioning the guide in relation to the door edge and adjacent structure, which matters when coordinating clearances and overlapping panels. In typical sliding door arrangements, this depth-oriented guide supports conditions where more upper engagement is needed, such as doors with added facing material or projecting trim near the track base.
The 12 FT long extruded aluminum profile provides continuous upper guidance across wide openings, which reduces alignment changes along the door path and supports uniform sliding feel from end to end. The extruded aluminum construction maintains a stable cross-section throughout the entire guide, which helps the interface with the 710-A track base remain consistent and predictable during installation and later adjustment. The 1.188 inch width sets a clear dimension for planning the upper guide footprint, which helps align the track base and door panel so that the door edge, top guide, and adjacent finishes relate in a controlled way. Satin clear anodized finish on the aluminum introduces a defined surface treatment that supports a clean, neutral appearance next to other anodized sliding components in the opening. By combining specified use with the 710-A track base and a profile oriented to greater depth, this EPCO 732-A guide gives installers a clearly defined upper guide option when the sliding door design calls for that deeper top engagement.
The EPCO 732-A upper guide is used as an upper guide when using the 710-A track base or when greater depth is required, so it serves as the top guide element in that sliding door setup.
The upper guide for 710-A track works with that specific base, so installations can align the guide and track as a coordinated upper system for the sliding door path.
The 12 FT long extruded aluminum construction lets the upper guide span wide openings in a single piece, supporting continuous guidance and uniform profile across the entire run.
The 1.188 inch width defines the lateral size of the guide, giving installers a fixed dimension to coordinate the guide relative to the 710-A track base and door edge.
The satin clear anodized finish on the aluminum provides a defined surface appearance, supporting a clean look that works with typical anodized sliding door hardware.
The extruded aluminum construction creates a consistent profile along the 12 FT length, helping the upper guide maintain uniform engagement with the 710-A track base.
The EPCO Upper Guide for 710-A Track pairs defined use with the 710-A track base, a 12 FT long extruded aluminum profile, and a 1.188 inch width to support upper guidance in sliding door hardware layouts. Satin clear anodized finish and the greater depth orientation position this 732-A guide for installations that need a deeper upper guide option along a long run. For projects built around the 710-A track base that call for stable top tracking and a clear dimensional profile, this EPCO upper guide offers a focused component choice.
Sold In: 1 Each