Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Upper Guide for 710-A Track keeps sliding door tops running in line by acting as the dedicated upper guide in a 710-A track assembly. Used as an upper guide when using 710-A track base, it stabilizes the door at the head, which helps doors track true in everyday use. The guide is made from extruded aluminum, so the profile is consistent along its full length and supports smooth guiding of the door. At 12 FT long, it spans wide or multiple-door openings in a continuous piece, reducing joints that can disrupt movement. The 1.188 inch width gives a defined guiding surface for compatible door hardware. Its oil rubbed bronze finish ties into darker sliding door hardware setups, helping the guide blend into the overall opening while still doing the guiding work overhead.
This EPCO upper guide for 710-A track is designed to work as the upper guide when using 710-A track base, so it fits into layouts built around that specific track series. The 12 FT long length allows long, straight runs over wide door openings, which supports layouts with broad single doors or multiple sliding panels sharing one continuous guide. With a 1.188 inch width, the guide sets a consistent channel dimension for the top of the door, helping hardware that engages this width track evenly along the opening. The extruded aluminum material supports a straight, uniform section from end to end, which helps installers position the guide so the door follows a consistent line relative to the bottom 710-A track base.
This EPCO upper guide is used as an upper guide when using 710-A track base, so it belongs wherever a 710-A track base is handling the bottom guidance of a sliding door. In sliding door hardware layouts using that base, the 12 FT long extruded aluminum section runs above the opening to capture and guide the door top. The 1.188 inch wide profile defines the guiding path for compatible top-mounted hardware, which lets the door travel along the full 12 FT length while staying aligned with the 710-A track base below. Because it can also be used as an upper guide when greater depth is required, it is suited to openings where a deeper head guide is preferred for stability, such as taller doors that benefit from more engagement at the top. The oil rubbed bronze finish positions the guide in projects where the visible hardware is finished in darker tones, helping the guide support the sliding function while visually integrating with related builders hardware and sliding door hardware.
The extruded aluminum construction means the upper guide has a consistent cross-section along its 12 FT length, which supports even contact with the door top hardware for predictable sliding. That long, continuous length minimizes transitions across the span of the opening, so the door can travel from end to end without passing over multiple shorter pieces that might interrupt movement. The 1.188 inch width sets a stable guiding surface so the door top remains referenced to the same dimension for the entire run, which aids in maintaining parallel alignment with the 710-A track base. When used as an upper guide when using 710-A track base, this matching geometry between top guide and bottom base helps the sliding door hardware function as a coordinated system rather than separate parts. When used as an upper guide when greater depth is required, the added depth of the profile provides more engagement around the door top or guide hardware, which can help reduce sway within the opening during regular operation. The oil rubbed bronze finish lets this guidance happen while aligning aesthetically with oil rubbed bronze sliding door hardware across the project.
The Upper Guide for 710-A Track serves as the upper guide when using the 710-A track base, helping keep the sliding door top aligned with the bottom track during operation.
This EPCO guide is used as an upper guide when using 710-A track base, so it is applied wherever a 710-A base is handling lower guidance on a sliding door opening.
The 12 FT long extruded aluminum section spans wide openings in one piece, supporting a continuous sliding path without intermediate joints along the upper guide.
The 1.188 inch width defines the guiding surface at the top of the door, supporting consistent engagement with the hardware that tracks within this upper guide profile.
The oil rubbed bronze finish lets the upper guide coordinate with oil rubbed bronze sliding door hardware, so the guide supports function while matching darker hardware finishes.
The extruded aluminum upper guide provides a consistent profile along its 12 FT length, which supports smooth sliding contact and uniform alignment of the door top.
The EPCO Upper Guide for 710-A Track combines extruded aluminum construction, a 12 FT long continuous section, and a 1.188 inch width to support stable sliding door guidance at the head of the opening. Used as an upper guide when using 710-A track base, it lets the top and bottom components work as a matched system across the entire span. The option to use it as an upper guide when greater depth is required gives flexibility where more top engagement benefits door stability. The oil rubbed bronze finish keeps the guiding function aligned with oil rubbed bronze sliding door hardware, so the installed opening works and presents as a coordinated assembly.
Sold In: 1 Each