Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Open flange with two pins 32mm sets you up with a closet rod support designed around a 32mm center-to-center layout, so it lines up with standard 32mm system drilling and helps keep closet hardware runs consistent across the project. This EPCO open flange is built for closet rods and closet tubing, so it sits in the Closet Rods & Flanges class and fits naturally into typical shelf, closet, and garage organization layouts. The open flange design lets the rod drop into place from above, which speeds installation and later adjustments because the rod can be lifted out without disturbing adjacent components. Two 32mm mounting pins are built into the flange, giving you a defined drilling pattern that helps control alignment and repeatability when you are working from a 32mm grid. The oil rubbed bronze finish delivers a dark, warm appearance that visually matches oil rubbed bronze closet hardware runs.
This EPCO 841-ORB open flange uses two 32mm mounting pins arranged 32mm center-to-center, so it works smoothly with panels drilled on a 32mm system and simplifies aligning multiple supports along a closet run. Because it is an open flange pattern, the rod is set down into the flange from above, which lets you stage the tubing after panel installation and makes later removal straightforward during changes or service. As part of the Closet Rods & Flanges group under shelf, closet, and garage organization, this flange is aimed at rod support on side panels or end panels, so its mounting layout is suited to typical closet partitions and cabinet sides. The oil rubbed bronze finish identifies this specific 841-ORB version, so it slots into oil rubbed bronze design schemes without introducing a conflicting hardware color.
This EPCO 841-ORB open flange sits in the Shelf, Closet & Garage Organization category, so it is positioned for use wherever closet tubing or rods need a stable end support on vertical panels. In closet layouts, the Closet Rods & Flanges product class signals that this part is intended as one of the primary rod-bearing points, so it helps carry clothing loads along hanging sections between cabinets or walls. For garage or utility spaces that still follow a closet-style rod layout, the same open design lets the installer drop in tubing after casework is set, which can speed sequencing when panels and shelves need to go in first. Because this flange is defined with 32mm mounting pins at 32mm c/c, it naturally pairs with ganged line-bored holes, allowing the same panel drilling pattern to serve both shelving hardware and rod supports in an organized run. The open top gives easy visual confirmation that the rod is fully seated in the flange, which supports quick walkthrough checks during punch-out on larger projects.
The two 32mm mounting pins on this EPCO open flange establish fixed reference points, so when panels are drilled on the 32mm grid, the flange position is governed by the system rather than field marking. That helps keep rod height uniform between sections, which matters when doors or fascia lines run past multiple openings. The 32mm center-to-center layout between the pins also plays into standard construction, enabling installers to rely on existing jigs or line-boring equipment instead of custom layouts for this component. The oil rubbed bronze finish on the 841-ORB version gives the flange a dark, muted tone, so it blends into oil rubbed bronze closet hardware schemes where rod supports are visible beneath shelving. Because this is an open flange design, the rod can be lifted out in a straight path once any fastening at the opposite end is released, which can reduce disassembly time when swapping rods or reconfiguring sections along the closet.
The EPCO 841-ORB part is an open flange with two pins in the Closet Rods & Flanges class, so it functions as a support point for closet rods or tubing in closet-style layouts.
The 32mm center-to-center layout matches 32mm system drilling, so the flange positions from standard line-bored holes and keeps rod height and spacing consistent across multiple cabinet or closet sections.
The two 32mm mounting pins locate the flange on 32mm-spaced holes, which locks in horizontal and vertical alignment and speeds layout on panels already drilled to the 32mm grid.
This open flange is listed under shelf, closet, and garage organization, so it is typically used on closet or similar panels wherever a closet rod or tubing needs end support.
The EPCO 841-ORB open flange has an oil rubbed bronze finish, so it visually coordinates with oil rubbed bronze closet hardware when the rod supports are exposed beneath shelves.
The open flange design allows the rod to drop in from above and lift out along a simple path, which simplifies installing and repositioning closet rods during layout changes or service.
The EPCO open flange with two pins 32mm c/c in oil rubbed bronze aligns with 32mm system drilling, so it fits naturally into closet and garage organization projects already based on that grid. As a Closet Rods & Flanges component, it is purpose-built to carry closet tubing loads while matching oil rubbed bronze hardware schemes. When a layout calls for rod supports that match 32mm line-bored panels and maintain a consistent visual finish, this 841-ORB flange gives a defined mounting pattern and an appearance tailored to closet-style installations.
Sold In: 1 Each