Oval Center Support Flange 15mm x 30mm describes a support point designed for oval closet tubing with a 15mm x 30mm opening, so the flange locates and supports matching oval rods along their length to reduce sag on longer closet runs. The EPCO branding ties this flange to a recognized closet rod hardware line, giving installers a consistent component when building or extending closet systems that already use EPCO oval tubing. The dull chrome description identifies the visible finish, so the installed support blends with other dull chrome closet parts in the same run for a unified appearance on open installations. The plated zamack construction described in the web text provides a cast metal body with a plated surface, giving a solid-feeling support point at each mounting position while presenting a finished, metallic look inside the closet.
The 15mm x 30mm opening noted in the web description defines the fit between this flange and the oval closet tubing, so installers can line up center supports with end flanges on rods that share this same oval size. The oval center support and flange identity in the product name indicates that this part is intended to sit under or around the center area of an oval rod run, so the support can be placed at intervals to help carry load between end points. Because the part is classified under Closet Tubing & Flanges and Closet Rods & Flanges, it is intended to mount to typical closet structures around the rod, allowing the opening to capture the tubing and hold it in position during use.
The category listing as Shelf, Closet & Garage Organization and the product class Closet Rods & Flanges connect this EPCO 847-DC flange to closet rod applications, so it works as a center support on hanging sections where oval tubing is already part of the design. The 15mm x 30mm opening size in the description points it to oval rods with that same cross-section, so it can be positioned along straight closet runs using matching tubing to add intermediate support points. The dull chrome finish reference means this support visually pairs with dull chrome oval tubing and end flanges in the same closet, allowing installers to carry one consistent finish through a walk-in or reach-in layout. Because the web description notes a plated zamack body, the support functions as a metal bearing point under the rod, so hanging loads transfer into the closet structure through a rigid casting rather than a non-metal interface.
The explicit manufacturer part number 847-DC and the EPCO brand name give installers a precise identifier, so the same oval center support flange can be specified across drawings, orders, and site work without confusion between similar oval sizes. The defined 15mm x 30mm opening directly controls how the rod seats in the flange, so when installers standardize on that oval tubing, center supports along the run locate the rod at a consistent height and lateral position relative to the closet panel. The dull chrome finish callout keeps the visible metal surfaces uniform along each rod, which helps shops deliver predictable finish matches across multiple jobs that use the same hardware line. The plated zamack construction, as described in the web text, means that each installed support presents a solid metal contact area around the oval opening, so rods rest on a firm surface at every support point, helping maintain alignment under normal hanging loads.
The Epco 847-DC flange is described as an oval center support with a 15mm x 30mm opening, so it is intended for oval closet tubing that matches that 15mm x 30mm cross-section.
The 15mm x 30mm opening defines the rod interface, so matching oval tubing seats correctly in the flange, helping keep the rod centered and aligned along the closet run.
The product name specifies dull chrome, so the visible surface presents a low-gloss metallic look that coordinates with other dull chrome closet hardware in the same installation.
The web description notes plated zamack, so the support body is a zamack casting with a plated surface, giving a solid metal support point with a finished exterior.
The Epco 847-DC is listed as an oval center support and flange for closet tubing, so it functions as an intermediate support under oval rods in closet organization runs.
The clear 847-DC part number, EPCO branding, and 15mm x 30mm opening let shops standardize on one oval center support, aiding consistent closet layouts across multiple projects.
The oval center support and flange identity, together with the 15mm x 30mm opening, define this EPCO 847-DC part as a match for closet systems using oval tubing in that size, so it serves as a predictable support choice across single and multi-rod layouts. The dull chrome finish and plated zamack construction provide a consistent metallic appearance and a solid metal body for closet rods resting on the support, which helps maintain a uniform look and dependable bearing points throughout the installation. For projects drawing from Wurth Baer Supply, this specific identification streamlines selecting and reordering the same oval closet support when expanding or duplicating closet designs.
Sold In: 1 Each