Oval center support flange defines this Epco 847-ORB fitting as a dedicated support point for oval closet tubing, so installers can place it where long spans need a stable, repeatable bearing location. The 15mm x 30mm opening is sized to receive matching oval closet tubing, which gives the rod a shaped pocket that resists twisting during use. The oil rubbed bronze finish establishes a dark, traditional appearance on the visible flange face, helping the support blend with similar dark-toned closet hardware. The plated Zamack construction uses a cast metal body with a plated surface, giving the support a rigid structure with a finished exterior that suits closet interiors. As part of the closet rods and flanges class, this center support works as one element in an oval hanging system, carrying load between end flanges so rods stay aligned. The Epco brand designation ties this part to a consistent 847-ORB reference across Closet Rods & Flanges.
The 15mm x 30mm opening on this Epco 847-ORB oval center support flange sets the interface for the mating closet tubing, so installers size their rod selection to that dimension. Because the opening is shaped for oval tubing, the rod nests into a consistent orientation and aligns with matching end flanges along the run. The plated Zamack construction provides a solid body for fastening to the supporting surface, so the center support becomes a fixed point that carries closet loads into the substrate. The oil rubbed bronze finish on the flange face presents a finished look where the support meets the rod, which matters when rods are installed at eye level in open closet layouts. As a Closet Rods & Flanges component, this part integrates into typical oval tubing layouts where intermediate support is needed at specific spans.
The Epco 847-ORB oval center support flange fits into closet, shelf, and garage organization layouts that use 15mm x 30mm oval tubing, because its opening is matched to that specific rod profile. Within the Closet Rods & Flanges class, it serves as a mid-span bearing between two ends, supporting hanging load where a long run crosses a back wall or panel. The plated Zamack body gives the support a compact, solid form that sits between the substrate and the oval tube, which helps maintain a straight rod line under typical closet loads. In hanger-heavy zones, the shaped opening captures the oval tubing so the rod cannot roll out of alignment as garments are moved along the run. The oil rubbed bronze finish coordinates with oil rubbed bronze closet tubing and related hardware, presenting a unified appearance on visible supports.
The 15mm x 30mm opening dimension on this oval center support flange defines a precise interface, allowing installers to repeat layouts wherever the same oval tubing size is specified. Because Epco identifies this part as 847-ORB, designers and installers can reference that code to match the same center support across multiple closets or phases of a project. The plated Zamack construction provides a stable, rigid base for the oval rod, so once the flange is fastened, the tube rests in a consistent position relative to shelves and doors above or below. The oil rubbed bronze finish keeps the visible face visually consistent with oil rubbed bronze closet tubing, supporting repeatable aesthetic results where multiple supports are used in a line. Within the broader Closet Rods & Flanges category, this center support establishes a known mid-span bearing point that installers can drop into drawings, translating directly from plan to field work.
The oval center support flange has a 15mm x 30mm opening, so it is designed to receive oval closet tubing with that matching 15mm x 30mm profile.
The oil rubbed bronze finish gives the flange a dark, traditional look, so the visible support coordinates with other oil rubbed bronze closet hardware along the rod.
The plated Zamack construction provides a cast metal body with a plated surface, giving the center support a rigid structure with a finished exterior at the mounting point.
The Epco 847-ORB center support is used in closet, shelf, and garage organization layouts as an intermediate support for 15mm x 30mm oval closet tubing.
The Epco 847-ORB part number identifies this specific oval center support flange with a 15mm x 30mm opening and an oil rubbed bronze finish for ordering and specification.
As part of the Closet Rods & Flanges class, this flange functions as a mid-span support that carries hanging load between end flanges on oval closet tubing.
This Epco 847-ORB oval center support flange combines a 15mm x 30mm opening, plated Zamack construction, and an oil rubbed bronze finish to match oval closet tubing runs. For closet, shelf, and garage organization projects using 15mm x 30mm oval rods, this center support establishes a defined mid-span bearing point within the Closet Rods & Flanges family, so layouts on paper translate cleanly to installed hardware. Select this part when the design calls for oil rubbed bronze oval tubing supported at intermediate points along the run.
Sold In: 1 Each