Open Flange w/Pins for 1 1-16 Tubing is an EPCO closet flange designed to support 1 inch and 1/16 inch tubing in closet applications. The zinc 32mm closet system flange with 5mm pins creates a stable connection to 32mm casework, which helps installers align closet rods accurately across a run. The oil rubbed bronze finish establishes a dark, uniform appearance on visible hardware, which supports consistent trim details in closets and storage areas. The EPCO 852-ORB part number identifies this specific open flange configuration, which simplifies reordering for matching projects or future additions. As part of the Closet Rods & Flanges product class, this component serves as a fixed support point for closet tubing, which helps distribute load into the cabinet or wall system. Sold by Wurth Baer Supply, this flange is targeted to shelf, closet, and garage organization work where coordinated hardware is required.
The zinc 32mm closet system flange with 5mm pins is tailored to 32mm case construction, so it fits directly into system holes in cabinet sides or partitions. Using a flange engineered for 1 inch and 1/16 inch tubing lets installers position closet rods with confidence that the tubing will seat correctly in the flange opening. The oil rubbed bronze finish keeps the visible edge of the flange consistent with matching rods, which supports clean visual alignment across open spans. The EPCO 852-ORB configuration focuses on predictable fit within Closet Rods & Flanges layouts, which helps reduce layout adjustments during installation of shelf, closet, and garage organization systems.
This EPCO open flange is specified for 1 inch and 1/16 inch tubing, so it works in closet layouts where those tubing sizes are part of the design. In Shelf, Closet & Garage Organization applications, this flange serves as a supporting point at cabinet sides or end panels, guiding the closet rod into position. The zinc 32mm closet system flange format means it integrates with 32mm drilling schemes commonly used in modular closet systems, which is useful when panels are drilled on line-boring equipment. The 5mm pins align with 5mm system holes in the panel, so the flange locates positively at the correct height relative to shelves or upper cabinets. Because the finish is oil rubbed bronze, it visually pairs with oil rubbed bronze closet tubing and related hardware within the same space.
The combination of zinc 32mm closet system flange and 5mm pins allows installers to place the flange directly into standard system holes, which streamlines layout and helps maintain consistent rod height from project to project. The open flange design for 1 inch and 1/16 inch tubing is engineered so the tubing nests in the opening, which helps control rod alignment between opposing panels. Using an EPCO 852-ORB flange tied to the Closet Rods & Flanges class supports repeatable selection across jobs because the same specification can be reused wherever that tubing and finish are called out. The oil rubbed bronze finish on the flange keeps the visible mounting point in the same color family as matching closet tubing, which reduces visual distractions along the installed rod line. Sourcing this EPCO open flange from Wurth Baer Supply ties the part to a distributor focused on closet and cabinet hardware for the woodworking trade.
The EPCO 852-ORB open flange is specified for 1 inch and 1/16 inch tubing, which allows it to support closet rods sized to those diameters in typical closet layouts.
The zinc 32mm closet system flange matches 32mm drilling patterns, so it fits directly into system holes in cabinet sides and helps maintain uniform rod height across panels.
The 5mm pins on the flange locate into 5mm system holes, which stabilizes the flange on the panel and assists in holding the closet tubing at the planned height.
This EPCO open flange is used in Shelf, Closet & Garage Organization projects as part of the Closet Rods & Flanges class to support closet tubing at cabinet or panel ends.
The oil rubbed bronze finish provides a dark bronze appearance on the flange, which coordinates with oil rubbed bronze closet tubing and other matching closet hardware components.
The EPCO 852-ORB part number uniquely identifies this open flange configuration, which simplifies specifying and reordering the same flange for matching closets or expansions.
The EPCO 852-ORB open flange pairs 1 inch and 1/16 inch tubing capability with a zinc 32mm closet system flange, which suits 32mm-built closets and storage systems. Its 5mm pins align with standard system holes, while the oil rubbed bronze finish coordinates with matching closet hardware. For Shelf, Closet & Garage Organization projects that rely on precise Closet Rods & Flanges placement, this EPCO open flange from Wurth Baer Supply supports consistent layouts across multiple installations.
Sold In: 1 Each