Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Open Flange w/Pins for 1"-1/16" Tubing describes an EPCO closet rod flange designed to support 1 inch and 1/16 inch tubing in closet applications. This flange is part of a zinc 32mm closet system, so it works within common system drilling layouts used in shop-built and modular closets. The open flange design allows the closet rod tubing to rest in the flange rather than being fully enclosed, which helps during installation and later removal when rearranging storage. The flange uses 5mm pins, so it sits in matching 5mm holes, letting the installer position it accurately without separate layout work. A polished chrome finish presents a clean, bright appearance on visible closet hardware, which matters for finished residential or light commercial closet work. Sold as Each, the part can be planned piece by piece for specific closet rod runs or replacement spots.
This EPCO 852-PC open flange is described as a zinc 32mm closet system flange with 5mm pins, so the installer uses 5mm system holes in the cabinet or closet panel to locate the flange. That 32mm reference ties into standard line-boring patterns, which helps align multiple flanges along a run and across opposing panels. The flange is specified for 1 inch and 1/16 inch tubing, so the closet rod is sized to sit securely in the open top while still lifting out when needed. Because it is an open flange rather than a closed ring, the tubing can be dropped in from above, which can help when retrofitting rods into existing closet sides or when working near fixed shelves.
The EPCO 852-PC open flange is identified under Shelf, Closet & Garage Organization and Closet Tubing & Flanges, so its primary role is supporting closet tubing in storage systems. As a closet rods & flanges class product, it functions as the bearing point that holds 1 inch and 1/16 inch tubing ends or intermediate supports along the span. The zinc 32mm closet system description connects it directly to panel-based closet systems that use line-bored holes, making it suitable for wardrobe cabinets, reach-in closets, and similar casework. The 5mm pins are intended to sit in 5mm system holes, so the flange location follows the same vertical rows used for other 32mm hardware. In that context, the open form lets the installer place the flange, set the rod into the cradle, and have the closet ready for hanging garments or storage without additional bracket styles.
The combination of a 32mm closet system flange and 5mm pins gives the EPCO 852-PC a defined interface with the panel, which supports repeatable placement across multiple units in a run. Because the pins register directly into 5mm holes, the flange sits in line with the drilling grid, helping opposing sides mirror each other for a level rod. The defined fit for 1 inch and 1/16 inch tubing means the same tubing size can be carried across an entire closet project, simplifying cutting and layout. The polished chrome finish contributes to a finished appearance at each rod support, important when the hardware is visible in open closets or wardrobe interiors. Being sold Each allows planners to allocate a precise count of flanges to match individual rods, whether they are single-span rods, divided sections, or additional center supports, so material lists can be tailored to the exact closet design.
The EPCO 852-PC flange is specified for 1 inch and 1/16 inch tubing, so it is suited to standard closet rod sizes used in many closet and wardrobe layouts.
The zinc 32mm closet system design means the flange works with 32mm line-bored panels, so its position follows the same hole spacing used throughout the closet system.
The 5mm pins seat into 5mm system holes in the panel, locating the flange by the drilling pattern and helping keep flanges aligned from side to side.
The open flange is used in closet and storage systems under the Closet Tubing & Flanges category, supporting ends or intermediate points of 1 inch and 1/16 inch rods.
The polished chrome finish presents a bright, clean look at each rod support, which suits visible closet interiors where hardware appearance matters to the finished project.
The EPCO 852-PC part number identifies this specific open flange, helping match it to drawings, previous orders, or other EPCO closet system components.
The EPCO 852-PC open flange brings together a zinc 32mm closet system design, 5mm pins, and a polished chrome finish to support 1 inch and 1/16 inch tubing. For closet projects laid out on a 32mm system with 5mm holes, this flange fits directly into the drilled pattern and supports standard closet rod sizes. Using this specific Closet Rods & Flanges class part across a project keeps rod supports consistent from cabinet to cabinet. For closet, wardrobe, or storage layouts built around 1 inch and 1/16 inch tubing, this flange provides a defined system-based way to hold the rod in place.
Sold In: 1 Each