Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Shelf and rod bracket for 1 to 1-1/2 tubing describes an EPCO bracket designed to support a closet shelf while carrying a hanging rod sized between 1 inch and 1-1/2 inch, which simplifies building combined hanging and storage sections from a single support point. Steel construction, as stated in the web description, provides a rigid support arm that handles typical closet loads without flexing as easily as lighter materials, helping maintain straight, level shelves over time. The 10.75 inch length called out in the description sets how far the shelf can extend from the wall, which helps installers plan shelf depth so it aligns with adjacent sections. The 12.75 inch projection defined in the product data describes the reach of the bracket out from the mounting surface, so the rod centerline lands in the correct position under the shelf for hanger clearance and consistent spacing.
The 10.75 inch length of this Epco 858-SS bracket, as specified in the product name, defines how deep the shelf can be framed from the wall, so installers can set out cut sizes for shelving material without guesswork. The 12.75 inch projection given in the product data controls how far the assembly extends into the room, which helps coordinate rod position with door clearance and aisle space. Because the bracket is designed for 1 inch to 1-1/2 inch tubing, the rod seating area is sized around that range, so the hanger line stays consistent regardless of rod diameter within that specification.
This closet shelf and rod bracket is listed under Shelf, Closet & Garage Organization and Shelving & Accessories, so it is intended for use wherever a shelf and clothes rod need to share a common support in closet or similar storage layouts. The bracket is part of the closet shelf and rod brackets product class, which means it is configured to carry both horizontal shelf loads and hanging loads from 1 inch to 1-1/2 inch tubing at the same station. Installers can use the 10.75 inch length to align with common shelf depths so folded items sit fully supported, while the 12.75 inch projection gives enough reach to position the rod under the shelf face for smooth hanging access.
The Epco 858-SS manufacturer part number ties this bracket to a specific pattern and dimension set, which helps maintain uniform appearance and load paths across an entire project when multiple brackets are specified. Steel construction, clearly noted in the description, provides a solid base for fastening, giving the bracket the rigidity needed to carry combined shelf and rod loads without sagging as quickly as thinner stamped alternatives. The defined rod range of 1 inch to 1-1/2 inch tubing means the cradling area is proportioned for those diameters, helping the rod sit correctly so hangers slide smoothly from bracket to bracket. The 12.75 inch projection also keeps the rod out toward the front of the shelf line, which improves access to garments and maintains a consistent look in long closet runs.
The Epco 858-SS shelf and rod bracket is specified for 1 inch to 1-1/2 inch tubing, so it holds rods within that diameter range for consistent hanging clearance.
The 10.75 inch length defines the arm reach from the wall, guiding how deep the shelf can be cut so it is fully supported along the bracket.
The 12.75 inch projection sets how far the shelf and rod extend into the room, helping position the rod for hanger clearance and consistent front alignment.
The Epco 858-SS bracket is described as steel construction, providing a solid support member to carry typical closet shelf and rod loads.
This closet shelf and rod bracket is part of the closet shelf and rod brackets class, so it is configured to carry a shelf above and a rod of 1 inch to 1-1/2 inch below.
The 858-SS manufacturer part number identifies this exact Epco shelf and rod bracket pattern, helping match units across projects and reorders.
This Epco 858-SS closet shelf and rod bracket combines steel construction with a 10.75 inch length and 12.75 inch projection, so it supports a shelf and 1 inch to 1-1/2 inch tubing from a single point. When a project calls for closet shelf and rod brackets that keep hanging and storage aligned, this part number gives a defined size and range to work from in layout and material planning.
Sold In: 1 Each