Description
Closed Flange For 1 Inch Tubing Use
closed flange for 1 inch tubing and 1-1/16 inch tubing gives a defined support point for closet or shelf rods, so the rod seats securely at the end of the run. This EPCO closed flange is part of the closet rods and flanges product class, which keeps it aligned with standard closet tubing setups in shop and jobsite builds. The satin nickel finish noted in the product name provides a neutral, project-friendly look that ties in with common closet and cabinet hardware. A zinc construction stated in the web description gives this flange a solid metal body, which supports the rod at the wall interface. The EPCO brand and 860-SN manufacturer part number make it easy to match this flange to other EPCO parts on repeat work or service calls.
Closet Flange Details That Support Rod Runs
- The web description states this is a closed flange for 1 inch and 1-1/16 inch tubing, so it captures the round tube end and helps keep the rod centered at the mounting point.
- Being in the closet rods and flanges product class means this part is intended as a support element for closet tubing, giving the rod a defined termination point at the wall or panel.
- The satin nickel callout in the product name signals a satin nickel look, allowing the flange to visually coordinate with other satin nickel closet hardware in the same space.
- The web description specifies a zinc body, providing a metal flange that can handle the direct contact of the tubing at the support point.
- The EPCO name and the 860-SN part number give a clear identifier, which helps installers order matching flanges for multiple openings or future projects.
Closet Tubing Flange Fit And Setup
The product description identifies this as a closed flange for 1 inch and 1-1/16 inch tubing, so it is sized to accept those rod diameters at the bearing point against the wall. As a closet rods and flanges component, it works as the termination support where the tube meets a vertical surface in a closet, shelf, or similar storage run. The zinc material noted in the web description gives a rigid metal contact surface between the tubing and the mounting surface. The satin nickel designation in the name means the visible face of the flange presents a satin nickel appearance, helping maintain a consistent look when the rod is installed in open closet or cabinet fronts.
Using This EPCO 860-SN Flange In Projects
Where This Satin Nickel Flange Is Applied
The category listing of shelf, closet and garage organization and closet tubing and flanges places this EPCO 860-SN flange in typical closet and storage projects, where round rod supports hanging space. Within that category, the closet rods and flanges product class defines its role as a supporting flange at the rod end. The description calling out 1 inch and 1-1/16 inch tubing shows it is meant for common closet rod diameters in that range, so it can be used where those tube sizes are specified. The satin nickel reference in the product name ties this flange to satin nickel hardware schemes, making it suited for closets or cabinets that carry satin nickel hanging rods and trims.
Details That Help Repeatable Rod Alignment
The term closed flange in the SAP and web description indicates that the tubing seats into a closed-end support, which helps locate the rod consistently at each end of a span. By being sized for 1 inch and 1-1/16 inch tubing, the flange defines the rod position relative to the wall or panel for those diameters, which supports even spacing from project to project using the same parts. The zinc construction called out in the description provides a formed metal body that holds its shape under normal closet loading, so the bearing point between rod and flange stays stable over time. The EPCO 860-SN identifier keeps ordering consistent, supporting repeat work where the same flange and rod sizing are used across multiple closets or units.
Common Questions About This Closet Tubing Flange
What tubing sizes does the EPCO 860-SN closed flange accept?
The EPCO 860-SN closed flange accepts 1 inch and 1-1/16 inch tubing, so it fits closet rods in that diameter range where those sizes are specified.
What is the EPCO 860-SN flange made from?
The EPCO 860-SN flange is described as zinc, giving it a metal body that provides a solid contact point where the closet rod meets the mounting surface.
How is this closed flange used in closet rod installations?
This closed flange is listed under closet rods and flanges, so it serves as an end support where 1 inch or 1-1/16 inch tubing meets a wall or panel.
What does the satin nickel designation mean for this flange?
The satin nickel designation in the product name indicates a satin nickel appearance, helping the flange visually match other satin nickel closet hardware.
How does the closed flange design affect rod positioning?
The closed flange design creates a defined seat for the tube end, helping keep the 1 inch or 1-1/16 inch rod consistently located at the mounting point.
Why is the EPCO 860-SN part number important for projects?
The EPCO 860-SN part number uniquely identifies this satin nickel zinc closed flange, making it straightforward to reorder matching flanges across multiple installations.
Select This Flange For Sized Closet Tubing
The EPCO closed flange for 1 inch and 1-1/16 inch tubing provides a defined support point for those rod diameters in closet and storage layouts. With a zinc body and satin nickel appearance, it aligns with typical closet tubing hardware while keeping part identification clear through the 860-SN number.
