Closed flange for 1 inch tubing from EPCO gives a defined mounting point for closet rods, so the tubing seats securely at the end of a span. By matching the tubing size, this closed flange helps control rod alignment and keeps loads bearing directly into the mounting surface. The EPCO brand and 860-SS part number identify this flange as a dedicated component for closet rods and flanges, so it fits into closet, shelf, and garage organization layouts that rely on standard round tubing. As part of the Closet Rods and Flanges product class, this flange works as the fixed anchor that lets the rod carry hanging weight along its length. Using a closed flange at the rod end also limits side movement, which helps keep hangers tracking consistently along the rod in everyday use.
The closed flange for 1 inch and 1-1/16 inch tubing sets the finished location of the closet rod relative to walls or panels because the tubing seats inside the flange body. By matching those tubing diameters, this EPCO 860-SS flange defines the rod centerline and end stop for closet and storage layouts using standard round tubing. The stainless steel material stated in the product name creates a hard bearing surface where the rod meets the support, which helps the tubing slide and rotate against metal instead of softer materials. As part of Wurth Baer Supply's Closet Tubing and Flanges category, this flange functions as a dedicated support point that keeps rods working predictably within closet, shelf, and garage organization systems.
The closed flange for 1 inch and 1-1/16 inch tubing fits into closet, shelf, and garage organization layouts identified in the product category, so it serves where round tubing is specified for hanging or support. Because it is part of the Closet Rods and Flanges product class, installers use this EPCO 860-SS flange wherever a rod end must terminate against a vertical surface while maintaining a defined rod position. The stainless steel material in the product name suits typical indoor storage environments, where metal closet tubing and metal flanges work together to carry hanging loads. Using a closed flange on each end of the 1 inch or 1-1/16 inch tubing lets the rod span between vertical supports with the rod ends captured, which stabilizes the run in day-to-day service.
The EPCO 860-SS manufacturer part number ties this closed flange to a specific geometry for 1 inch and 1-1/16 inch tubing, which helps installers repeat closet layouts using the same rod sizes across multiple openings. Because the flange is described as closed, the tubing nests into a defined circular seat instead of resting on an open cradle, so the rod end returns to the same position after movement. The stainless steel body provides a rigid interface between the closet rod and the mounting surface, which maintains the alignment of rods as clothing loads change over time. As part of Wurth Baer Supply's closet tubing and flanges offering, this closed flange integrates with other closet rods and flanges in the same family, which supports consistent hardware selection across a project.
The closed flange for 1 inch and 1-1/16 inch tubing accepts either of these tubing diameters, so one flange model can be used wherever those standard closet rod sizes are specified.
The Closed Flange for 1 inch-1-1/16 inch Tubing Stainless Steel - Epco 860-SS uses stainless steel, giving the flange a metal contact surface suited to closet and storage environments with metal rods.
The closed flange for 1 inch tubing surrounds the rod end, so the tubing seats inside a circular pocket, which holds the rod in a consistent location against the mounting surface.
This closed flange is listed under Shelf, Closet and Garage Organization and Closet Tubing and Flanges, so it is applied at rod ends in those storage and hanging installations.
The manufacturer part number 860-SS identifies this exact EPCO closed flange, so installers can match the same 1 inch and 1-1/16 inch tubing support across multiple openings.
The EPCO closet rod flange serves as the fixed end support in a closet rods and flanges assembly, so the tubing bears its load into the mounting surface through this stainless steel fitting.
Choose the Closed Flange for 1 inch and 1-1/16 inch Tubing Stainless Steel - Epco 860-SS when the layout calls for standard round closet tubing anchored at the ends. Using this EPCO stainless steel closed flange, installers can set stable rod terminations across closet, shelf, and garage organization projects supplied by Wurth Baer Supply.
Sold In: 1 Each