
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
open socket flange for 1-5/16 in tube from EPCO is an open flange designed for 1-1/4 and 1-5/16 inch tubing, so it supports standard closet rod sizes used in many residential and light commercial installs. The open socket design lets the rod drop into place from the front, which simplifies installs where you cannot slide a continuous rod in from the end. The flange fits tubing in those two specific diameters, giving a snug bearing surface that helps the rod sit level across the span. This Epco 864-MB part is classified under closet rods and flanges, so it is intended as a structural support point in a closet or storage system. The black finish identified as BL in the description provides a dark, uniform look that blends with matching hardware in modern closet layouts.
The open flange for 1-1/4 and 1-5/16 inch tubing is designed to work with 32 mm spaced holes, so it aligns directly with line-bored closet panels in that system. Using the 32 mm pattern ties the rod position to the same grid used for shelves and other components, which keeps vertical spacing consistent throughout a run of cabinets. The flange acts as the interface between the drilled panel and the round tubing, so its geometry determines the rod centerline location relative to the hole pattern. Because the tubing size and hole spacing are defined in the description, installers can plan bracket placement and mating supports in advance and repeat the same layout across multiple openings.
This Epco 864-MB open socket flange is specified for both 1-1/4 and 1-5/16 inch tubing, so it serves typical round closet rods without mixing different flange part numbers. That dual-size capability means the same flange can be used where one section of a project calls for 1-1/4 inch tube and another uses 1-5/16 inch, while maintaining consistent hardware appearance. As part of the closet rods and flanges product class, it is intended to act as a bearing support at the cabinet or wall, carrying the rod load into the surrounding structure. In shelf, closet, and garage organization applications, that role matters because the flange location sets the working height of the hanging space and the clearance above any lower shelves or cabinets.
The description notes that this is an open flange, which means the tubing is supported from below while the front is open so the rod can be dropped into the socket. In real installations, that geometry is useful where walls or end panels prevent sliding a full-length rod through closed rings. Installers can set both flanges, cut the tubing to length, and lower it into the openings, reducing handling in tight closets. The black BL finish mentioned in the SAP description creates a dark visual frame at each support point, which can coordinate with other black closet tubing components in the same run.
The flange is defined as fitting 32 mm spaced holes, aligning it directly with the 32 mm cabinet system commonly used in panel fabrication. In practice, that means the mounting interface lines up with standard line-bored holes, so the rod centerline will fall at a predictable distance from the panel edge and from adjacent shelf pin rows. When installers use a drilling machine or template based on the 32 mm pattern, this repeatable positioning lets them carry the same hanging height and setback across every opening on a job.
Because the flange is tied to the 32 mm pattern and sized for 1-1/4 and 1-5/16 inch tubing, fabricators can pre-plan hole locations knowing exactly where the round tube will sit relative to doors, face frames, or sliding mechanisms. The zinc body described in the web text provides the structural link between the drilled panel and the steel or aluminum tube, helping the system feel solid when loaded. In closet, garage, or general storage layouts built from line-bored panels, this combination of defined tube size and defined hole spacing supports efficient production work and consistent field results.
The Epco 864-MB open socket flange is specified for 1-1/4 inch and 1-5/16 inch tubing, so it supports the two common closet rod diameters used in many closet and storage installations.
The flange fits 32 mm spaced holes, so it aligns with line-bored panels in a 32 mm system and places the rod at a predictable height and setback across repeated openings.
This open flange is classified under closet rods and flanges within shelf, closet, and garage organization, so it is used as a support point for round rods in those storage applications.
The web description references zinc, indicating the flange body is zinc-based, which provides a metal support surface between the mounting panel and the closet tubing.
The open socket design lets the 1-1/4 or 1-5/16 inch tubing drop in from the front, which helps in tight closets where sliding a full-length rod through closed rings is difficult.
The BL black finish gives the flange a dark, uniform appearance, allowing it to visually match other black closet tubing components and trim within coordinated storage layouts.
The Epco 864-MB open socket flange is identified specifically for 1-1/4 and 1-5/16 inch tubing and for 32 mm spaced holes, so it aligns with standard closet rod sizes and modern line-bored cabinet systems. The zinc construction and black BL finish described in the product data define both the structural role and appearance in shelf, closet, and garage organization projects. For installations built around round tubing and 32 mm layouts, this open socket flange from Wurth Baer Supply provides a clearly defined interface between drilled panels and the working closet rod.
Sold In: 1 Each