Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
open socket flange for 1-5/16in tube describes an EPCO closet rod flange designed to support tubular closet rods, so it gives installers a defined bearing point for hanging clothes or storage rails. The flange is specified as an open flange for 1-1/4 and 1-5/16 tubing, which lets you work with two common closet rod diameters using a single part, simplifying layout on mixed-diameter jobs. The oil rubbed bronze finish called out in the product name gives the flange a dark, traditional look that coordinates with matching rods and closet hardware for a consistent installation. The product sits in the Closet Rods & Flanges class under Shelf, Closet & Garage Organization, so it is intended to serve as part of a closet or similar hanging system rather than a general structural bracket. The EPCO brand and 864-ORB part number tie this flange to a defined manufacturer spec, which helps match it to existing or planned EPCO closet tubing layouts.
The open flange for 1-1/4 and 1-5/16 tubing sets the fit envelope for this part, so rods within those sizes seat correctly and bear on the flange lip instead of relying on improvised supports. With an open socket layout, the flange receives the tubing from the front or top, which is useful when closet walls are already finished because the rod can be set after painting and trim work without threading through a closed ring. The oil rubbed bronze identity in the product name aligns the flange with similar-finished rods and closet fittings, so alignment and appearance are coordinated along the full span. Because the flange is classed under Closet Rods & Flanges, installers can treat it as the primary end or intermediate support point for closet tubing in that size range.
This EPCO open flange for 1-1/4 and 1-5/16 tubing is suited to closet and storage layouts that use round tubing in those diameters, because the socket is specified around that size range. In Shelf, Closet & Garage Organization projects, this flange serves as a rod support tied to side walls or end panels, so hanging loads are transferred into the structure at each flange location. The oil rubbed bronze character described in the name aligns it with darker closet schemes, allowing the flange to sit visibly at rod ends without drawing attention away from the overall design. Since the product sits in the Closet Rods & Flanges class, it functions as a defined connection point between EPCO tubing and surrounding casework or framing.
The open flange layout for 1-1/4 and 1-5/16 tubing matters because it allows rods of those sizes to drop straight into the socket, which simplifies fitting in tight reach-in closets or between built-in panels. Using a flange built for both 1-1/4 and 1-5/16 tubing also reduces part variety on site, since the same EPCO 864-ORB item can be staged for multiple closet runs that may use either common diameter. The Closet Rods & Flanges classification signals that this part is intended as a structural support for closet rods, giving installers a defined role for the component when planning how many supports to distribute along a span. The oil rubbed bronze identity ties it to a coordinated finish family, which matters when rods and flanges are visible at eye level and need to present a uniform appearance from flange to flange.
The Epco 864-ORB open socket flange is specified for 1-1/4 and 1-5/16 tubing, so closet rods in those diameters are intended to seat properly in the socket.
The open socket flange design lets 1-1/4 or 1-5/16 tubing drop into place from the front or top, which simplifies setting or removing rods in finished closets.
The 864-ORB designation and product name describe an oil rubbed bronze open socket flange, giving the closet rod support a dark, traditional appearance.
This EPCO open socket flange is listed under Closet Rods & Flanges in Shelf, Closet & Garage Organization, so it is intended for closet and storage rod support.
A flange sized for 1-1/4 and 1-5/16 tubing covers two standard closet rod diameters, so one part number can serve different rod sizes across a project.
The EPCO 864-ORB designation identifies this specific open socket flange in oil rubbed bronze, helping match flanges to existing EPCO closet rods and layouts.
The EPCO open flange for 1-1/4 and 1-5/16 tubing in oil rubbed bronze gives closet projects a defined rod support sized to two common diameters, so layout stays consistent across sections. By using the EPCO 864-ORB part number from Wurth Baer Supply, installers align flanges with the Closet Rods & Flanges family and keep future orders matched to the same tubing size range and finish.
Sold In: 1 Each