Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
closed flange for 1-5/16 tubing from EPCO provides a fixed end support for closet rods using 1-1/4 inch or 1-5/16 inch tubing, so a single part can serve both common closet rod diameters on the same job. The flange is designed for closet tubing and flanges applications, so it fits directly into standard closet organization layouts where round hanging rods are required. This closed socket flange design wraps around the end of the tube, which helps capture the rod end and keep it seated during daily use. The part is specified as a closed flange with pins for 1-5/16 inch tube in the SAP description, which ties it to Epco 865-MB for ordering and reordering. A black finish gives the flange a dark appearance that blends with dark rods or contrasting hardware where a black detail is preferred in the closet interior.
This Epco 865-MB closed socket flange fits 32 mm spaced holes, so it aligns with standard 32 mm construction rows in cabinet and closet side panels without custom drilling patterns. The SAP description notes pins on the flange, which seat into those 32 mm holes to locate the flange and help hold position while the rod is set and the panel is handled. Because it is a closed flange for 1-5/16 inch tube that also matches 1-1/4 inch tubing per the web description, it supports rods sized to either dimension, which reduces the need to adjust panel drilling when switching between the two rod diameters on related projects. Being a closet tubing and flanges component, it sits at the end of the rod run, where accurate position against the panel provides a consistent reveal between the rod and the closet sides.
The Epco 865-MB closed socket flange is part of the Closet Rods and Flanges product class, so it is intended specifically for supporting round closet tubing in hanging storage layouts. Because the web description states it works with both 1-1/4 inch and 1-5/16 inch tubing, it suits retrofit jobs where existing rods may be one size while new sections use the other, yet the same flange pattern can be maintained. The flange fits 32 mm spaced holes, so it aligns well with closets or cabinets built on the 32 mm system, placing the rod in a predictable position relative to shelf holes and panel edges. Its black finish, stated in the SAP description, coordinates with dark closet interiors or black rods so the termination point of the rod reads as a deliberate design element in the run.
The SAP description identifies this part as a closed flange with pins for 1-5/16 inch tube, and those details work together to support repeatable installs. The closed design captures the rod end, giving a defined stop point for 1-1/4 inch or 1-5/16 inch tubing, as specified in the web description, so rod length can be cut to land cleanly in the socket. The pins that relate to 32 mm spaced holes provide a mechanical index into the panel, so when one side is set, the matching flange on the opposite panel can be aligned at the same hole centerline, helping keep rods level from front to back. Because it is sold under a single manufacturer part number, 865-MB, the same sizing and pin layout is repeatable across multiple openings on a project, which supports uniform rod height and appearance through a closet or cabinet bank.
The Epco 865-MB closed socket flange is described as fitting 1-1/4 inch and 1-5/16 inch tubing, so it supports both of these common closet rod diameters in the same flange pattern.
The 32 mm hole spacing means the flange pins fit standard 32 mm system rows, so rod height and position can track the same reference holes across multiple closet or cabinet sections.
The closed socket design surrounds the rod end, providing a positive stop for the 1-1/4 inch or 1-5/16 inch tubing and helping keep the rod seated during normal use in closet runs.
Pins on the Epco 865-MB flange locate into 32 mm spaced holes, helping position the flange accurately in the panel and holding alignment while rods are set across the opening.
The black finish, noted in the SAP description, gives the flange a dark appearance that pairs with black or contrasting rods, supporting a specific visual look at the rod terminations.
This Epco 865-MB part is listed under Closet Rods and Flanges in the Shelf, Closet and Garage Organization category, so it aligns directly with hanging storage layouts using round rods.
The Epco 865-MB closed flange for 1-1/4 inch and 1-5/16 inch tubing combines a closed socket, pins, and 32 mm hole spacing to support rod ends in closet and cabinet projects. Its place in the Closet Tubing and Flanges category means it is targeted to hanging storage layouts rather than general hardware. Selecting this black closed flange for 1-5/16 tubing aligns the finish, pin layout, and tubing size with standard closet construction, helping deliver consistent rod support points across related openings.
Sold In: 1 Each