Closed socket flange for 1-5/16 tubing defines this Epco 865-PC part as a dedicated support for round closet rod. That focused sizing helps installers set up hanging space using 1-1/4 and 1-5/16 inch tubing without adapting other hardware. The flange is described as a closed flange, which supports the tubing from the end rather than wrapping around the outside, so rods seat positively in a fixed position. That end-support style matters when laying out straight runs where each rod needs a defined stop point at the wall or panel. The zinc construction gives the flange a solid metal body, so it handles the job of carrying typical closet rod loads without relying on plastic components. The polished chrome description identifies the surface finish, which provides a bright, clean look that ties in with chrome closet tubing for a consistent appearance.
This Epco 865-PC closed flange is described for 1-1/4 and 1-5/16 inch tubing, so the socket is sized to receive standard closet rod in those diameters. That specific sizing helps installers drill and locate supporting panels with confidence that the rod will seat properly into the flange. Because it is a closed style, the rod end slides straight into the socket from the front, which supports straightforward alignment when working inside finished cabinet or closet openings. The polished chrome finish on the flange works well where visible mounting points are part of the finished design, so installers can set rods at eye level without needing to hide the mounting points.
The Epco 865-PC closed socket flange sits in the Closet Rods & Flanges product class, placing it squarely in closet hanging applications. Its description as a closed flange for 1-1/4 and 1-5/16 inch tubing ties it directly to standard round closet rods used in reach-in and wardrobe interiors. Installers can use this flange at the end of a rod run against a wall or inside a cabinet panel, where the closed socket supports the rod from the end. That end support helps create stable single-span or multi-span hanging sections that rely on defined bearing points. Because it is part of the Shelf, Closet & Garage Organization grouping, the flange is suited to projects where hanging space needs to integrate with shelving or other organizational components around it.
The defined sizing for 1-1/4 and 1-5/16 inch tubing on the Epco 865-PC flange simplifies planning, since installers can select standard closet rod stock and know the rod will seat into the socket. This predictable fit helps avoid gaps or loose engagement at the rod ends, which supports smoother hanger movement along the run. The closed socket form supports the rod from underneath and around the end, so each rod run terminates at a clear stop point that resists shifting. That stop point helps maintain consistent spacing for multiple parallel rods or for rods aligning with door openings. The zinc construction provides a metal base under the polished chrome surface, so the visible finish works together with a solid body to handle everyday hanging loads while presenting a finished look. The Epco brand and 865-PC part number give installers an exact reference, which helps maintain consistency when adding more closet sections over time.
The Epco 865-PC closed socket flange is described for 1-1/4 and 1-5/16 inch tubing, so it is intended to receive standard closet rods in those two diameters.
The closed flange socket supports the rod from the end, so the tubing slides into a defined cup, giving the rod a fixed stop point at the mounting surface.
The flange is described as polished chrome over a zinc body, so it presents a bright chrome appearance while using zinc as the underlying metal structure.
This Epco 865-PC flange is in the Closet Rods & Flanges class, so it is used at the ends of 1-1/4 or 1-5/16 inch closet rods in closet or cabinet interiors.
A closed socket flange like the Epco 865-PC captures the rod end, which provides a positive stop and helps keep the rod from shifting sideways during everyday use.
The 865-PC part number identifies this specific Epco closed flange for 1-1/4 and 1-5/16 inch tubing, which helps match existing installs or specify the same flange again.
The Epco 865-PC closed socket flange offers a zinc body and polished chrome finish sized for 1-1/4 and 1-5/16 inch tubing, so it suits standard closet rod runs. When a project calls for defined end support and a chrome appearance, this flange matches that requirement. For closet, cabinet, or wardrobe interiors built around round rod, choosing this specific closed flange lets installers align rod diameter, finish, and support style around a known part number from the Closet Rods & Flanges class.
Sold In: 1 Each