Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO polished chrome closet rod is a round steel tubing section designed to carry hanging loads across an 8 foot span in closet or storage runs. The 1-1/16 inch outside diameter creates a substantial bar profile that works well in typical closet layouts where hangers are used. The steel construction gives the rod a rigid backbone so it supports garment weight across the length when properly supported. The 14 gauge wall thickness adds material where the rod sees stress, which helps the tubing resist denting under hanger pressure. The 8 foot length lets installers bridge standard reach-in or longer wardrobe sections in one continuous piece, which reduces joints along the run. The polished chrome finish presents a bright, finished look that ties in with other chrome closet hardware and gives a clean appearance in open or built-in projects.
The 8 foot length of this EPCO 890-8-PC tubing lets installers span long closet interiors in a single piece, which simplifies layout because there is one continuous centerline to support. The 1-1/16 inch outside diameter sets the critical interface dimension for selecting matching round supports sized to this rod, which helps the tube seat correctly in its holders. The 14 gauge wall thickness provides a sturdy bearing surface where supports grip the tubing, which reduces deformation at contact points under hanging loads. The polished chrome finish on the outside of the steel creates a smooth surface that allows hangers to move along the rod with less resistance, which supports clean, repeatable sliding during daily use.
The EPCO polished chrome 1-1/16 inch diameter closet rod fits projects that call for a full-size round hanging bar with a defined outside diameter. In reach-in closets, the 8 foot length can run wall-to-wall in many standard room widths, which keeps the span continuous for hanging shirts, coats, or other garments in a single row. In longer wardrobe or storage banks, the 8 foot section can function as one segment within a sequence of aligned rods, which helps maintain a consistent bar diameter across multiple compartments. The 14 gauge wall thickness supports use in residential or light commercial closet settings where hangers are repeatedly moved along the steel surface. The polished chrome finish suits applications where the rod remains visible, such as open wardrobes or built-ins with minimal doors, because the reflective surface coordinates with other polished chrome closet hardware.
The 1-1/16 inch outside diameter on this EPCO 890-8-PC tubing defines the key sizing point for holders or brackets, which lets installers pair the rod with supports designed around this specific dimension for a snug, controlled fit. The 8 foot overall length reduces the number of cuts required to match many common closet widths, which streamlines layout and measurement steps during installation. When trimming is needed, the uniform 14 gauge steel wall thickness makes the cut edge predictable along the length, which helps produce a clean end for seating in a support. The polished chrome finish on the exterior provides a smooth, hard surface that interacts well with hanger hooks, which supports consistent sliding action without rough spots along the rod. Together, these characteristics let the tubing integrate cleanly into closet systems that rely on accurate diameters, straight spans, and a finished chrome look.
The EPCO polished chrome closet rod has a 1-1/16 inch outside diameter, a 14 gauge wall thickness, and an 8 foot length, which defines its fit, strength, and span for closet layouts.
The 1-1/16 inch outside diameter sets a substantial bar size that supports standard hangers and determines the correct size of supports or holders that grip the tubing.
The 14 gauge wall thickness gives the steel tubing extra material at stress points, helping the rod resist denting and maintain shape under hanging loads in typical closets.
The 8 foot length lets installers span many closet widths with a single piece, which reduces splices and simplifies layout for straight hanging sections.
The polished chrome finish provides a bright, reflective surface that matches polished chrome hardware and offers a smooth track for hangers along the rod.
The EPCO 890-8-PC part number identifies this specific 8 foot, 1-1/16 inch outside diameter, 14 gauge polished chrome steel closet rod within the EPCO product line.
The EPCO polished chrome 1-1/16 inch diameter, 8 foot long, 14 gauge steel closet rod offers a defined combination of size, length, and finish for hanging runs. For projects needing a round steel bar with this specific outside diameter and polished chrome surface, this 890-8-PC tubing provides a single-piece span that supports standard hanging layouts while aligning with polished chrome closet hardware in the same space.
Sold In: 1 Each