Plastic Cable Grommet 60 Mm For Clean Cable Runs

Plastic cable grommet 60 mm gives you a simple way to finish a 60 mm cable pass-through in desks, closets, or media areas using a sized plastic sleeve and cover. This Epco GRS-60-G grommet is built around a 60 mm diameter requirement, so it ties directly to standard hole saw sizes for quick layout. The gray finish keeps the opening visually tidy where cables drop through. As a plastic grommet, it separates wiring from the raw hole edge, which protects cable jackets during pull-through and everyday movement. The EPCO brand and clear GRS-60-G part number make it easy to specify the same grommet across drawings, bids, and repeat jobs. As part of Wurth Baer Supply's multimedia and workspace component range, it fits naturally into desk, workstation, and cabinet projects that need organized cable routes.

Key Epco GRS-60-G Details For Project Planning

• The spring loaded cover is designed to sit over the cable opening, so it can close against the grommet when not heavily loaded with cords, which keeps the pass-through neater in finished furniture runs.
• The two piece construction gives you a separate body and cover assembly, which supports straightforward hole-edge finishing first and then cover orientation for the cable direction you want to present on the work surface.
• The requirement to drill a 60 mm diameter hole ties directly to a specific tool setup, which reduces guesswork when laying out multiple openings in desks, panels, or closet components on the bench or on-site.
• The plastic material keeps the grommet lightweight and easy to handle during installation, while creating a smooth bearing surface around the opening that is friendlier to cable jackets than a raw cutout.
• The gray color offers a neutral, unobtrusive look at the cable exit point, which helps the grommet blend into many laminated, painted, or melamine work surfaces across office and closet projects.

Drilled 60 Mm Hole Setup And Fit Details

This Epco plastic cable grommet is specified to fit into a drilled 60 mm diameter hole, so layout starts with sizing your bit or hole saw to that exact dimension. Using the 60 mm requirement, you can mirror the same opening across multiple worktops or cabinet panels and expect the grommet body to seat consistently from piece to piece. The two piece design means the body goes into the 60 mm opening first and the spring loaded cover then aligns over it, so fit is controlled by the drilled diameter rather than surface trimming. Because the material is plastic, the body conforms cleanly to the round cut, supporting a snug, finished look around the edge of the hole.

Using This Plastic Cable Grommet In Workspaces

Where The Epco GRS-60-G Grommet Works Best

The Epco GRS-60-G plastic cable grommet is classed under multimedia and workspace components, so it is oriented toward desks, workstations, and similar cabinet or closet projects that carry power or data lines. Its 60 mm diameter requirement lines up well with common cable clusters in office setups, making it suitable for bringing several cords through a single hole in a work surface. As a grommet within the broader grommets product class, it provides a defined route for cables through wood, laminate, or similar panels, which reduces wear on the panel edge and on the cable jackets themselves. The gray color helps it settle visually into neutral-toned furniture and organizational systems where a clean, understated cable exit is preferred.

Details That Support Repeatable Cutouts And Finishes

The defined need to drill a 60 mm diameter hole gives installers a fixed target for tooling, which supports repeatable results when cutting multiple panels or tops on a production schedule. Tying the grommet to a single, clear dimension means your cutouts can be batched with the same bit or hole saw, improving consistency across a run of workstations or closets. The two piece construction, with a separate spring loaded cover, lets you seat the body first and then orient the cover, so the visible part of the grommet can be aligned with the preferred cable flow without recutting. Because the material is plastic, the edges of the grommet present a smooth interface to cable jackets, which supports long-term movement of cords through the opening without the sharpness associated with unfinished panel edges.

Common Questions About The Epco GRS-60-G Cable Grommet

Selecting This 60 Mm Cable Grommet For Your Job

The Epco GRS-60-G plastic cable grommet, 60 mm diameter and gray, offers a defined solution when a 60 mm pass-through is already part of your layout or drawings. Its two piece, spring loaded cover design helps finish cable openings in desks, closets, or multimedia cabinets using a single drilled dimension. For projects running through Wurth Baer Supply, this grommet gives you a specified part number within the grommets class that can be repeated across jobs for consistent cable routing and a clean, plastic-edged opening.