Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Würth #8 x 2" flat head ASSY assembly screw is built for cabinet and casework joints that pass through one panel and anchor into a second. The 2-inch length bridges the panel-to-panel gap common in cabinet box construction, drawer box assembly, and frameless casework, giving the fine thread and drill point enough material to develop strong, clean-seated connections.
Cabinet carcass construction typically stacks 3/4-inch panels, and joining them face-to-edge means the fastener must clear the first panel and bury its threads entirely in the second. At 2 inches, this ASSY screw does that in a single pass. It also handles drawer box corners assembled from 1/2-inch stock, where a shorter screw would under-penetrate and a longer one would blow through the opposite face. Frameless cabinet sides joined to a top or bottom panel, and nailer strips fastened inside a cabinet box, are both natural fits for this length.
The fine thread holds well in the dense fiber structure of MDF, melamine-faced particleboard, and Baltic birch plywood without the over-driving risk that coarse threads carry in tight-grained materials. The drill point starts without walking and clears chips as it advances, which matters most when driving close to a panel edge where splitting pressure builds quickly. Once the shank is seated, the flat head's milling nibs cut a countersink in the face material so the head lands flush rather than sitting proud or requiring a separate countersink step. In a production run of identical carcasses, that consistency shows up as better-aligned joints and cleaner interior faces.
Cabinet shops assembling frameless boxes in volume use this length because it works across the common panel thicknesses without adjusting the screw gun stop. Finish carpenters building site-assembled casework and built-ins find the drill point reliable when working close to routed edges or dados. Millwork teams running through laminated panels appreciate that the nibs handle the countersink without a separate setup. The 500-piece box keeps a production station stocked through a full run without interruption.
Fine thread engages more cleanly in the dense fiber matrix of MDF and melamine particleboard. Coarse thread can strip the receiving member in these materials, especially on repeated assembly or when driving close to an edge. Fine thread provides better holding power and a more controlled drive in engineered panels.
The drill point is designed to reduce or eliminate separate pre-drilling in most cabinet panel applications. Results depend on panel density, edge distance, and driving speed. In very thin stock or extremely close to a panel edge, a pilot hole still helps prevent surface breakout.
The RW20 is a Würth-proprietary drive that takes a dedicated RW20 bit. It is not interchangeable with standard Torx or star drive bits. Using the correct RW20 bit is what delivers the deep, positive engagement the drive is designed for.
The milling nibs on the underside of the head are designed to cut the countersink as the screw seats, so a separate countersink step is not required in most panel materials. In very hard laminates or high-pressure laminate faces, results may vary.
The zinc finish is suited for dry interior applications. This screw is not positioned for exterior, high-humidity, or treated-lumber environments.
When a 2-inch ASSY screw seats flush, holds tight, and drives without splitting the panel or stalling the bit, it disappears into the work the way a fastener should. That is what this screw is built to do across every carcass in the run.
Sold In: 500 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Each |  WW06147020 Mfr# 061470 20 961 10 | RW20 ASSY Insert Drive Bit |
