Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Pro Value PRO 100 Series delivers a complete set of 18 inch full-extension side-mount ball bearing drawer slides in a zinc finish, rated 100 lb per pair. Designed for cabinet shops and contractors who need dependable performance at volume, this set is the workhorse choice for kitchen, utility, and office drawer installations.
An 18 inch slide length suits cabinet interiors in the 18 to 20 inch depth range — a common dimension in base cabinet drawer banks, bathroom vanities, and office credenzas. Full extension means the drawer member travels its full nominal length, bringing the entire drawer box out to the cabinet face. The back of the drawer is reachable without digging. That matters for deep pots-and-pans drawers, bathroom storage, and any drawer where the rear contents are used regularly. The 100 lb per pair rating covers everyday residential and light commercial loads without stepping up to a heavier-duty class.
Both cabinet and drawer members are cold-rolled steel with a bright zinc plating. Zinc is the standard protective finish for side-mount ball bearing slides used in dry, indoor environments — it resists the light corrosion that comes with everyday handling and humidity inside a cabinet. This is a functional, not a decorative, finish: the slides sit beside the drawer box and are largely out of sight once the drawer is installed. For painted or contrasting cabinet interiors, the zinc tone is neutral enough to disappear.
Cabinet shops running production batches of base cabinet drawers will find the PRO 100 format straightforward: non-handed slides reduce sorting time, and the standard 1/2 inch side clearance fits the same drawer box math used across most side-mount installations. Contractors replacing worn-out slides in kitchen renovations can match the 18 inch length and clearance to existing drawer boxes with minimal modification. Homeowners tackling a single drawer repair get a complete pair in one package. In face-frame cabinet construction, rear mounting brackets are required to support the back end of each slide — those brackets are sold separately and are series-specific, so confirm compatibility before ordering.
No — 18 inches is the closed length of the slide. Because this is a full-extension slide, the drawer member travels approximately the full slide length, bringing the entire drawer box out to the cabinet face. Slide length and drawer travel are two separate specs.
Yes. The set contains one pair — one slide for each side of the drawer — which is everything needed to install a single drawer.
No. The PRO 100 is non-handed, so both slides in the set are identical. Either slide fits either side of the drawer box.
Side-mount slides need support at the rear of the slide in face-frame cabinet construction. Rear mounting brackets are required and are sold separately — confirm you have the correct series bracket before beginning the install.
No. The PRO 100 is a standard-motion ball bearing slide with no soft-close damper, self-close spring, or hold-in detent. The drawer stays wherever it is left.
The Pro Value PRO 100 Series 18 inch set gives production shops and renovation contractors a full-extension, 100 lb rated, zinc-finished side-mount slide in a non-handed format — straightforward specs, no sorting, and a complete pair in every package.
Sold In: 60 Set
