Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand Hettich Quadro V6 push-to-open undermount drawer slide in the 420mm length — a fully concealed, full-extension runner with a mechanical push-to-open mechanism, built for handle-less frameless cabinetry with 1/2 to 5/8 inch drawer sides. Sold as a single left-hand member; pair it with the matching right-hand 420mm Quadro V6 push-to-open slide to make one working set.
Push-to-open is the right motion technology when the design calls for a seamless, hardware-free drawer front. A light press on the face ejects the box; a normal push closes it. This mechanical system suits modern slab fronts and integrated panel programs where visible pulls would interrupt the surface. The Quadro V6 push-to-open version is a distinct model from the soft-close variants in the series — it closes without damping. If a damped, quiet close is the priority alongside handle-less operation, look to a combined push-to-open soft-close model rather than this one.
This slide is made for frameless cabinet construction, where the runner mounts directly to the flat cabinet side panel. It is not configured for face-frame installs; face-frame applications require a different version with the appropriate rear mounting brackets.
The Quadro V6 runner is steel throughout, with a zinc finish that handles years of indoor use without issue. Ball bearings in a formed steel carriage give this slide its smooth, controlled pull — consistent from the first cycle to the thousandth. Because the slide mounts beneath the drawer box, the zinc finish is a functional corrosion barrier rather than a decorative surface; nothing shows when the drawer is open except the box itself.
Build the drawer box to Hettich's published specification for the Quadro V6 series: nominal 420mm length, the correct box-width formula for the side clearance, bottom recess, rear notch, and the drilling required for Quadro V6 front locking devices. An off-spec box will not seat correctly on the runners.
Cabinet shops running handle-less European frameless lines — slab-door kitchens, bath vanities, and laundry or utility cabinetry where clean surfaces matter — will find this the practical choice at this capacity and length. The 420mm nominal length suits standard base cabinet drawers in the mid-depth range. At 67 lb per pair, it covers most kitchen and bath drawer loads comfortably. Shops that need more capacity for heavy pulls-out or pot drawers should step up to a higher-rated slide in the Quadro line. Production environments benefit from ordering left and right slides as separate bulk SKUs, stocking each hand by the case.
This is a single left-hand cabinet runner. You need one left-hand and one right-hand Quadro V6 420mm push-to-open slide to make a complete working set for one drawer. Ordering two of this SKU gives you two left-hand slides, which will not function as a pair.
No. This is the mechanical push-to-open version; the drawer closes without a damper. The closing action is positive but undamped. If soft-close damping is important, select a Quadro V6 soft-close model instead — the push-to-open and soft-close functions are separate models in this series.
This SKU is configured for frameless cabinets. Face-frame installations require a different version of the slide with rear mounting brackets. Using this version in a face-frame cabinet without the correct rear support will result in an improper installation.
The Quadro V6 in this version is designed for drawer sides from 1/2 inch to 5/8 inch (approximately 12 to 16mm) thick. For 3/4 inch sides, a different series or version is required — the 5/8 inch and 3/4 inch versions are not interchangeable.
Quadro V6 front locking devices are series-specific accessories. Confirm whether they are included with this SKU or need to be ordered separately before placing your order, and use only Quadro V6 locking devices — clips from other brands or series will not fit.
Match the 420mm left-hand slide to its right-hand mate, build the drawer box to the Quadro V6 specification, and the result is a clean, pull-free front that opens with a touch and rides on a ball-bearing carriage rated for the job.
Sold In: 1 Each