Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand 520mm Hettich Quadro V6 undermount slide with mechanical push-to-open — a concealed, full-extension runner on ball bearings for frameless cabinets and handle-less drawer fronts, rated 67 lb per pair.
Push-to-open is the right motion choice when the design calls for a completely hardware-free front — no pulls, no finger pulls, no edge grooves. A light press on the drawer front trips the mechanism and the drawer pops open. This Quadro V6 model closes without damping: the drawer shuts and stays shut, held by the mechanism. If a damped, silent close is a priority alongside handle-less operation, that is a separate Quadro V6 model. This one is for jobs where the clean, push-open function is the feature and closing feel is secondary.
The 520mm nominal length suits drawer boxes running roughly in the 18 to 20 inch depth range for frameless cabinet construction. The slide mounts directly to the cabinet side panel — no face frame, no rear bracket required for this cabinet type.
The Quadro V6 runs on ball bearings, which give it a noticeably precise feel compared to roller-based undermounts. Steel members with a zinc finish handle the demands of daily indoor use. Because the slide sits fully beneath the drawer box, the zinc finish is functional rather than decorative — what the customer sees is the bottom of the drawer box and a clean, hardware-free interior. The slide's frameless mounting profile fits directly on the cabinet side panel without additional hardware for that construction type.
Cabinet shops and installers building contemporary frameless kitchens, bath vanities, or furniture pieces with handle-less fronts will find this slide is a direct fit. It works for residential and light commercial applications where the 67 lb per pair rating covers the load — spice drawers, utensil drawers, clothing storage, and similar everyday pull-outs. Shops that stock left-hand and right-hand Quadro V6 push-to-open slides in bulk can pull matched pairs per drawer as they build. This is not the slide for face-frame cabinets or for applications that need soft-close damping; both of those require a different Quadro V6 variant.
This SKU is the right-hand slide only. You need one right-hand and one left-hand Quadro V6 push-to-open slide in the same 520mm length to make a working pair for one drawer.
No. This is the push-to-open version of the Quadro V6 — it opens with a press and closes without a damper. If you want damped, silent closing, choose the soft-close Quadro V6 variant for your drawer instead.
This model is built for drawer sides from 1/2 inch to 5/8 inch (12.7mm to 16mm). Build the box to the Hettich Quadro V6 specification for the 520mm length, including the correct box width, bottom recess, and any rear notch or locking-device drilling the series requires.
This SKU is rated for frameless cabinet construction. Face-frame installs typically require a different version or series-specific rear mounting brackets — check that the variant you select matches your cabinet construction before ordering.
Quadro V6 front locking devices are series-specific accessories. Confirm whether they are included with this SKU or need to be ordered separately before the drawer can be mounted.
Match the 520mm length to your drawer box depth, pair this right-hand slide with its left-hand counterpart, build the box to the Quadro V6 specification, and the push-to-open mechanism does the rest — no hardware on the face, nothing visible beneath the box.
Sold In: 1 Each