
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
16mm high spacer profile gray gives setback shelves a simple way to support sliding door runner profiles, so the shelf layout works with the hardware without rebuilding cabinets. This spacer profile from Hettich America Corporation sits between the side and centre panels, so you can match shelf position to sliding door hardware that needs a defined setback. Distance tape in a gray finish blends into typical cabinet interiors, so the spacer can do its job without drawing extra attention on exposed edges. Thickness 1 mm keeps the profile slim, so shelf height changes are minimal while still creating the required offset. The gray spacer profile works as part of sliding door hardware builds, so installers can fine-tune the relationship between the shelf and the runner profiles in one consistent step.
Distance tape 16mm h grey works as a stick-on spacer, so installers apply it directly to the shelf surface where the runner profiles sit. The spacer profile is designed to be positioned between side and centre panels, so the offset is created exactly where the sliding door hardware needs support. Thickness 1 mm keeps the added build-up precise, so alignment between runner profiles and the cabinet structure stays predictable along the full 15 m roll. The gray finish suits typical sliding door hardware layouts, so the tape combines with the runner profiles in a visually consistent way. Because the spacer profile is part of the sliding door hardware range, its geometry supports the required 16 mm height, so setback shelves can match the hardware specification in a repeatable workflow.
Hettich spacer profile 16mm is specified for use with set back shelves, so it fits projects where the shelf edge does not line up directly under the sliding door runner profiles. By placing the distance tape on the shelf between the side and centre panels, the spacer creates a defined bearing surface for the runner profiles, so the load from the doors transfers reliably into the cabinet structure. The spacer profile is part of sliding door hardware applications, so it supports runner profiles wherever the cabinet design needs a controlled 16 mm height offset. Thickness 1 mm means the tape adds spacing without creating bulky steps, so the relationship between shelves, panels, and doors stays clean in wardrobes, built-ins, or other sliding assemblies.
The spacer profile in gray finish prevents deflection of the runner profiles, so doors track more consistently because the runners are backed up across their length instead of bridging gaps. Positively connected solution without gap between shelf and profile means the tape and shelf act together, so the runner profiles see a solid platform even when the doors are loaded. Since the distance tape simply sticks onto the shelf, installers can fine-tune runner position along the full 15 m roll, so each shelf can be aligned to the same standard in a run of cabinets. Easily shortened lengths help adapt the 16mm high spacer profile gray to different cabinet widths, so each bay can be cut to size while keeping the same 1 mm thickness and functional behavior.
The 16mm high spacer profile gray creates the required offset for set back shelves, so sliding door runner profiles can be supported at the correct position on the shelf.
The distance tape prevents deflection of the runner profiles by filling the gap between shelf and runner, so the runners rest on a continuous, supported surface.
The spacer profile is simply stuck onto the shelf between the side and centre panels, so the sliding door runner profiles sit on a defined support zone.
The 1 mm thickness adds a controlled build-up under the runner profiles, so you gain the needed height adjustment without reducing usable shelf space significantly.
The spacer profile is supplied on a 15 m roll, so it can serve several shelves or cabinets in one run where consistent runner support is needed.
The spacer profile is easily shortened, so each shelf can receive a piece cut to its width for neat terminations at the side and centre panels.
Distance tape 16mm h grey from Hettich America Corporation works with set back shelves to support sliding door runner profiles at a defined height. The spacer profile in gray finish sticks between side and centre panels, so it forms a positively connected solution without gap between shelf and profile. Thickness 1 mm and a 15 m roll format let you apply consistent spacing across multiple shelves while cutting each length as needed. For sliding door hardware projects that rely on setback shelves, this 16mm high spacer profile gray offers a focused way to support runner profiles along the full shelf depth.
Sold In: 1 Each