Distance tape 22mm H grey is a 22mm high spacer profile in a gray finish from Hettich America Corporation, so it lines up sliding door runner profiles on setback shelves with a consistent 22mm build-up. This spacer profile is designed for use with set back shelves, which lets you position runners correctly when the shelf front edge sits behind the cabinet front. It simply sticks onto the shelf between the side and centre panels, so you can create a defined mounting surface without routing or machining. Because it prevents deflection of the runner profiles, the tape supports more accurate sliding motion over time. The 1 mm thickness gives a controlled stand-off between shelf and profile, which is important when you want repeatable reveals across a run of doors.
This distance tape is designed to simply stick onto the shelf between side and centre panels, so installation becomes a straightforward bonding step instead of a multi-stage machining process. Because it is a 22mm high spacer profile, you are setting the runner profile against a defined vertical reference that repeats from shelf to shelf. The 1 mm thickness establishes a consistent distance between shelf and runner profiles, which affects how doors track and how close they sit to the cabinet structure. The tape format on a 15 m roll allows you to cut each run to length and press it into place in one pass, which supports efficient installation on banks of sliding door cabinets.
This 22mm high spacer profile in gray finish is intended for use with set back shelves, so it is well suited when your sliding door runner profiles must sit further inside the cabinet line. By simply sticking onto the shelf between side and centre panels, it provides a continuous support surface exactly where the runner profile needs backing. That positioning helps the profile carry the load along the shelf depth rather than at a few point contacts. Because the product prevents deflection of the runner profiles, it is particularly useful in wider openings where runners experience more bending force. The gray finish keeps the visible edge discreet in many cabinet interiors, which can matter on open-shelf or partially exposed sliding systems. With a 15 m roll, one product can serve multiple cabinets or long runs on the same project without interrupting workflow for additional material.
The 1 mm thickness of this distance tape creates a defined interface between shelf and runner profile, so every mounted runner shares the same stand-off dimension. That consistency contributes to smoother sliding because each door tracks against the same spacing rather than shifting between slightly different offsets. The positively connected solution without gap between shelf and profile means the runner sits firmly against the spacer profile, which supports stable fastening and reduces flexing at the interface. Preventing deflection of the runner profiles helps maintain door reveal lines over time, especially on sliding doors that are opened and closed repeatedly. Since the tape is easily shortened from the 15 m roll, installers can cut precise lengths to match each shelf width, which reduces overlapping joints that could affect profile straightness. In a sliding door hardware layout, these details support repeatable results across multiple openings and reduce the chance of rework caused by misaligned or sagging runners.
The 22mm high spacer profile acts as distance tape that supports sliding door runner profiles on setback shelves, which helps position and stabilize the runners during operation.
The 1 mm thickness defines a consistent gap between shelf and runner profile, which supports smooth tracking and predictable door clearances along the cabinet run.
The spacer profile simply sticks onto the shelf between side and centre panels, which positions it directly under the runner profiles for continuous support.
The distance tape creates a positively connected solution without a gap between shelf and profile, which supports the runner along its length and reduces bending.
The Hettich 9200422 distance tape is supplied on a 15 m roll, which allows multiple shelf runs to be cut from one continuous length.
The spacer profile is specified for use with set back shelves, so it helps align runner profiles where the shelf front is recessed inside the cabinet front line.
The 22mm high spacer profile in gray is built for use with set back shelves, so it aligns directly with sliding door runner layout needs on recessed shelves. By simply sticking onto the shelf between side and centre panels, it gives you a straightforward way to support and space runner profiles. The 1 mm thickness and positively connected solution without gap between shelf and profile help control clearances and reduce runner deflection. With a 15 m roll that is easily shortened, this Hettich distance tape suits projects where consistent runner support and repeatable alignment are priorities.
Sold In: 1 Each