Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SlideLine M profile set 18mm high 2500mm provides a single profiles set as an upgrade for furniture applications with doors running across each other, so sliding fronts can be laid out cleanly on cabinets and similar casework. The aluminum runner profile in silver anodized finish forms the running track for the doors, giving a stable guide for smooth movement across overlapping fronts. The 18mm high profile works as a compact running section that sits neatly on furniture, helping align sliding doors along a consistent reference height. With a total length of 2500mm, the profile spans typical cabinet or wardrobe widths in one piece, which helps reduce joints along the travel path. As a set from Hettich America Corporation, it fits into the SlideLine M system environment, supporting projects that standardize on this sliding door hardware line.
The aluminum runner profile in this SlideLine M sliding door profile set is pre drilled, so mounting points are defined for consistent fastening along the 2500mm length, which helps keep the track straight during installation. Two mounting clips in the set support fastening the profile to the furniture construction, giving reference points that locate the runner in relation to cabinet edges. The 18mm high design provides a compact section that suits furniture applications where the running track needs to sit close to panel surfaces, supporting low build-ups around the sliding area. Because profiles can be shortened as required, installers can trim ends to match exact carcass dimensions, which supports accurate alignment of stoppers and door overlays within the SlideLine M system concept.
The SlideLine M profile set, designed as a single profiles set for furniture applications with doors running across each other, fits projects where two sliding fronts overlap on cabinets or storage units. In these cases, the 2500mm aluminum runner profile in silver anodized finish serves as the guiding track that carries the running gear for each overlapping front. When profiles can be shortened as required, the same base profile adapts to various cabinet widths, from smaller units to longer sideboards, by cutting the section to length. If long enough, the same profile can be cut into two and used as top and bottom runner profiles, so shorter furniture pieces gain both tracks from one length while still using the SlideLine M sliding principle. Colored sets for concealing the runner profiles with a colored cover must be ordered separately, which allows the visible track area on open-front furniture or wardrobes to be visually integrated into darker or lighter casework designs.
The Hettich SlideLine M profile set uses an aluminum runner profile with silver anodized finish, which provides a hard, smooth running surface for the door hardware, supporting consistent motion over time. Because the runner profile is pre drilled, fixing positions are already defined, helping installers place screws at intervals that distribute loads along the 2500mm span and reduce track deformation. The presence of two mounting clips establishes primary attachment points, which aids in aligning the profile straight during the first fastening steps before all pre drilled points are secured. When profiles can be shortened as required, fabricators can trim ends cleanly to align with carcass sides or design reveals, resulting in a finished look that follows the furniture geometry. In smaller cabinets, the option where profiles can be cut into two and used as top and bottom runner profiles allows both tracks to share identical drilling patterns and profile geometry, helping keep door behavior symmetrical between the upper and lower running paths.
The SlideLine M profile set is described for furniture applications with doors running across each other, so it suits cabinets or units where overlapping sliding fronts are required.
The SlideLine M profile set has a 2500mm aluminum runner profile, giving enough length to span full-width cabinets or to be cut into shorter segments for multiple pieces.
The profiles can be shortened as required, so installers can cut the 2500mm runner profile to match custom cabinet widths or design dimensions on site.
The profile can, if long enough, be cut into two and used as top and bottom runner profiles, letting one length serve both tracks on smaller furniture pieces.
The runner profile is aluminum with a silver anodized finish, providing a hard, smooth surface for sliding components and a neutral appearance on furniture.
The runner profile is pre drilled, so fastening points are predefined, supporting straight alignment and even screw spacing along the 2500mm track.
The SlideLine M profile set 18mm high 2500mm from Hettich America Corporation combines a single profiles set concept with an aluminum runner profile, silver anodized, pre drilled, to support efficient sliding door layouts on furniture. Because profiles can be shortened as required, one 2500mm length adapts to many cabinet widths, while the option to cut one profile into top and bottom runner profiles on shorter pieces improves material use. For projects where furniture applications with doors running across each other are planned, this sliding door hardware set provides a defined track solution that aligns with the SlideLine M system approach.
Sold In: 1 Set