1200mm WingLine L Guide Profile For Sliding Doors

1200mm WingLine L guide profile defines a straight running path for the door, so the sliding motion follows a controlled line over the full 1200mm length. The bright finish identifies this profile visually, which helps when matching it with other bright sliding door hardware in the same run. This WingLine L guide profile is supplied by Hettich America Corporation under manufacturer part number 9237987, so the part identity stays clear when matching components on a project or repeat job. The profile is part of the Hettich WingLine L sliding door hardware family, which means it is intended to guide compatible sliding door elements in that system during opening and closing. The long profile length allows a single continuous guide run on many cabinet or closet layouts, reducing joints where misalignment might otherwise occur.

Key WingLine L Guide Details For Projects

• The 1200mm long guide profile gives a continuous guiding edge over its full length, helping sliding doors track consistently along cabinets or other casework in one direction without break points along the run.
• The bright finish on the guide profile provides a clean metallic look, which matters when the track edge is visible and needs to coordinate with other bright sliding door hardware in the installation.
• This WingLine L guide profile belongs to the sliding door hardware category, so it is purpose-designed to work as the lower or upper guiding element in a sliding door assembly where guided movement is required.
• The part is supplied by Hettich America Corporation, giving it a defined source and part reference for jobs that need consistent hardware selection across multiple openings or repeat installations.
• The manufacturer part number 9237987 clearly identifies this exact 1200mm WingLine L guide profile, supporting accurate reorders and matching against drawings, cut lists, or hardware schedules.
• The profile is described specifically as a WingLine L guide profile, tying it to that named system so installers can align this piece with other WingLine L components in the same sliding solution.

Screw On WingLine L Guide Profile Installation

This WingLine L guide profile is designed for screwing on, so it fastens directly to the cabinet or supporting structure using screw fixings through the profile. Screw on mounting provides a mechanically secure connection between the 1200mm profile and the substrate, which supports stable door guidance along the full length. The screw on positions are pre drilled in the profile, so hole locations are already set for screw placement along the run. Pre drilled screw positions define an even spacing of screws, which helps distribute loads from the sliding door more evenly over the 1200mm length.

Using The 1200mm WingLine L Guide In Work

Where The 1200mm Guide Profile Is Applied

This 1200mm long WingLine L guide profile is used in sliding door hardware assemblies where a straight guiding track is required over roughly 1200mm. As part of the builders hardware and sliding door hardware class, it suits cabinet or similar sliding door projects that match the WingLine L system layout. The bright finish aligns visually with other bright sliding components, which benefits projects where the guide edge or hardware line remains visible along the door bottom or top. Because it is a WingLine L guide profile, it belongs in installations designed around that named system so the moving door elements follow the intended guided path. The defined 1200mm length helps designers and installers plan hardware runs with known dimensions when configuring door openings.

Why Screw On And Pre Drilled Details Matter

The screw on design of this WingLine L guide profile means each fixing point directly connects the profile body to the cabinet or frame, which helps the sliding path remain stable under repeated door movement. Screw mounting lets the installer draw the bright guide profile tightly against the mounting surface so the guided path sits where planned in the WingLine L layout. The pre drilled screw on positions in the 1200mm profile set consistent hole spacing, so each screw shares the guiding load along the track. Pre drilled positions also define the line for screw placement, helping keep the profile aligned with the cabinet edge or reference line during installation. Because the part is identified as Hettich WingLine L sliding door hardware under part number 9237987, it can be matched confidently with other WingLine L components, which supports repeatable door motion across multiple openings using the same guide profile detail.

Common Questions About This WingLine L Guide

Selecting This WingLine L Guide Profile Today

This 1200mm WingLine L guide profile in bright finish delivers a defined sliding track from a known Hettich America Corporation part. The screw on, pre drilled design supports straightforward placement on cabinets or similar structures. When a project calls for a 1200mm straight guide within the WingLine L sliding door hardware family, this 9237987 guide profile offers a clear, documented option for building consistent runs.