1200mm WingLine L Guide Profile, Anodized

1200mm WingLine L Guide Profile For Sliding Doors

1200mm WingLine L guide profile gives a defined guiding track for sliding doors over a 1200mm run, which helps doors travel in a controlled line on longer cabinets or wider openings. The guide profile is part of the Hettich WingLine L sliding door hardware system, so it is intended for use where a dedicated WingLine L guide is required in a project. The bright finish stated in the description provides a clean look along the length of the door run, which is useful when the profile is visible in higher-end cabinetry or commercial installations. The guide profile is described as anodized, which provides an anodized surface along the 1200mm length and supports a stable finish where doors move repeatedly along the guide.

Guide Profile Details That Support Door Travel

• The 1200mm long guide profile provides a continuous guiding surface over 1200mm, which supports smoother door movement on longer cabinet spans or wider furniture fronts where multiple panels run on one track.
• The WingLine L guide profile format ties into Hettich WingLine L sliding door hardware, which allows the profile to serve as the required guide element in that system so door panels follow a predictable path.
• The bright finish along the guide profile length gives a visually clean edge, which matters on installations where the track is exposed at eye level or used in commercial furniture runs.
• The anodized description indicates an anodized surface treatment on the profile, which gives the metal a finished appearance that suits cabinetry and sliding door hardware applications.
• The guide profile is identified as sliding door hardware in the builders hardware and sliding door hardware categories, which positions it for use in sliding door assemblies rather than hinged door layouts.

Screw On WingLine L Guide Profile Installation Use

The product description specifies the WingLine L guide profile as "For screwing on", which means the profile is designed to be fixed to the cabinet or door structure with screws so it stays in place under door movement. Screw on positions are described as pre drilled, so the profile has pre-drilled locations along its length that accept screws and define where the guide is fastened. Those pre drilled screw on positions support consistent mounting points along the 1200mm length, which helps installers line up the profile quickly and repeat the same layout across multiple cabinets or door runs in a job.

Using This Anodized Guide Profile In Projects

Where The 1200mm Guide Profile Fits Best

The 1200mm WingLine L guide profile is listed under sliding door hardware, so it is intended for use wherever a sliding door guide is required in a furniture or cabinet project. The 1200mm length supports applications where a single continuous guide run is preferred, such as wider wardrobe doors or longer overhead cabinets that match the 1200mm dimension. Being described specifically as a WingLine L guide profile means it is oriented to projects that use the WingLine L sliding door hardware concept, so the guide acts as a dedicated track element for those layouts. The anodized bright finish suits installations where the hardware line is visible when the doors are open, because the finish presents a consistent appearance across the length of the guide profile and aligns with the look expected from Hettich sliding door hardware components.

Details That Support Repeatable Sliding Door Results

The screw on design of the WingLine L guide profile gives a fixed mount point along the sliding path, so once the profile is secured it holds the guiding line for the door. Pre drilled screw on positions create consistent spacing for each fixing point, which helps installers repeat the same screw layout from cabinet to cabinet without having to mark out positions along the 1200mm length. The 1200mm dimension itself defines how far the guide reaches, so installers can plan cabinet widths or door arrangements to align with that fixed length and reduce cutting steps when a 1200mm run is suited to the project. The anodized designation states that the profile surface has an anodized treatment, which offers a stable appearance along the contact area where sliding components track during regular door use.

Common Questions About The WingLine L Guide Profile

Selecting This WingLine L Guide Profile For Jobs

The 1200mm WingLine L guide profile in bright anodized finish gives a defined 1200mm sliding door guide with pre drilled screw on positions, so it suits projects that use Hettich WingLine L hardware and need a continuous screw mounted guide. Choosing this specific 9237989 profile through Wurth Baer Supply lets installers specify the stated WingLine L guide profile length, finish, and screw on format for cabinet and furniture runs built around a 1200mm sliding path.