2400mm WingLine L Guide Profile, Anodized

2400mm WingLine L Guide Profile For Sliding Runs

2400mm WingLine L guide profile defines the running line for a WingLine L sliding door system over a 2400mm length, so door movement follows a controlled path along the full run. This guide profile is part of Hettich America Corporation sliding door hardware, which lets the door edges track correctly within the overall builders hardware layout. The WingLine L guide profile belongs to the sliding door hardware class, so it serves as a guiding element rather than a hinge or support, keeping the door aligned with its designated track line. The profile is identified by manufacturer part number 9237990, giving installers a precise reference when matching system components across multiple openings. The guide profile is designed for screwing on, so it forms a fixed, mechanically fastened guide path that resists shifting once positioned. Screw on positions are pre drilled, which sets out standard fixing points along the profile so each fastener location is clearly defined before installation.

Sliding Door Guide Profile Details That Matter

• The 2400mm long guide profile spans a substantial sliding distance, which allows a single piece to serve long cabinet or closet sections without joints that could interrupt door travel or require extra alignment work.
• The WingLine L guide profile works as part of sliding door hardware, so it contributes to how the door leaf tracks and aligns with adjacent components in the overall builders hardware layout during everyday operation.
• The guide profile is supplied in an anodized finish, which treats the surface of the profile so it presents a uniform appearance that coordinates with other anodized sliding door components across the installation.
• The guide profile design is specified for screwing on, so mechanical fixings clamp the profile firmly to the mounting surface, creating a stable guide line that resists movement under repeated door cycles.
• Screw on positions are pre drilled along the guide profile, which sets the drilling pattern in advance so installers follow the predefined holes instead of marking each point, helping maintain straight alignment along the 2400mm length.

Screw On WingLine L Profile Installation Points

The WingLine L guide profile is designed for screwing on, so installation relies on mechanical fastening directly through the profile into the supporting structure along the length. Screw on positions are pre drilled, giving a fixed sequence of mounting points that act as a template for the installer while running the profile into place. Because the guide profile measures 2400mm long, the pre drilled pattern helps spread fixation points across the full span so the guide remains consistent from end to end. The anodized finish is applied to the guide profile surface, so installers handle a finished piece that is ready to align along the designated sliding door route on cabinets or similar structures.

Using This WingLine L Guide Profile In Practice

Where This 2400mm Guide Profile Fits Best

This Hettich America Corporation WingLine L guide profile sits within the sliding door hardware category, so it suits projects that call for a guided sliding action instead of hinged swing doors. At 2400mm long, the profile works on extended runs where doors travel a significant distance, such as wide cabinet sections or other linear applications that benefit from a continuous guide. The guide profile format focuses on defining the path for the WingLine L system, so it is suited to locations where a fixed, linear guide is required above or below the moving door leaf. Because it is designed for screwing on, the profile integrates into substrates that accept screw fixings, allowing the guide to be anchored at repeated points along the entire length. The anodized finish supports use where a consistent, metallic appearance is preferred alongside other anodized builders hardware.

Details That Support Straight Runs And Alignment

The screw on design of this WingLine L guide profile means each fixing passes through the profile into the supporting material, tying the guide directly to the structure so the door path stays stable over time. Screw on positions that are pre drilled along the profile turn the guide into a built-in drilling template, so each screw is located at a predefined point that helps keep the profile straight across its 2400mm span. The continuous 2400mm length reduces the need to join multiple shorter profiles, which removes potential step points that could interfere with the smooth movement of a WingLine L sliding door. The anodized finish on the guide profile surface brings a treated outer layer, giving the component a finished look that coordinates with other anodized sliding door hardware in the same installation line. The manufacturer part number 9237990 ties all these details together into a specific, repeatable selection for projects using WingLine L sliding door hardware.

Key Questions About This WingLine L Guide Profile

Selecting This WingLine L Profile For Sliding Runs

This 2400mm WingLine L guide profile from Hettich America Corporation offers a defined guide path, an anodized finish, and a screw on, pre drilled format that supports straight, repeatable sliding runs. Using manufacturer part number 9237990 connects your selection directly to this specific sliding door hardware component for WingLine L applications.