2" Wide x 28" High Square Rockwell Table Leg Set, Black Matte, 4/Set
Description
Square Rockwell Table Leg Set For Work Surfaces
Square Rockwell table leg set from Peter Meier, Inc. provides four matching table legs for building or supporting work surfaces and tables where a consistent leg style and height are required across the project. Each leg is 2 inches wide with a square profile, which creates a clear, straight-edged support footprint that aligns easily with square tops and layouts. The 28 inch height positions the work surface at a standard table level, which supports comfortable seated use in many shop, office, or residential settings. The black matte finish gives the legs a non-reflective appearance, which helps the legs visually recede under darker tops and can coordinate with other black matte hardware on the job. As a product in the Work Surface & Tables category and the Table Legs product class, this set is suited for projects where dedicated structural support is needed under worktops.
Key Rockwell Table Leg Details For Projects
- The 2 inch square leg profile creates a broad contact area where leg meets floor and top, which helps distribute load more evenly across the leg footprint on many hard surface installations.
- The 28 inch leg height establishes a fixed reference when laying out table projects, simplifying planning of apron heights and clearances under the work surface for seating or storage.
- The black matte finish provides a consistent color across all four legs, which simplifies visual matching on multi-leg assemblies and supports uniform appearance across a run of tables.
- The set format with four legs supports typical four-corner table layouts, which is useful for straightforward rectangular or square work surfaces needing one leg at each corner.
- Being identified under Work Surface & Tables and Table Legs allows these legs to be matched to jobs specifically calling for table-height support components from a known category.
Table Leg Mounting Height And Adjustment Details
The legs feature a 1 1/8 inch adjustable foot, which provides vertical adjustability at the bottom of each leg so the overall table height can be fine-tuned on site. This adjustment range helps compensate for small floor variations, allowing the installer to level the work surface without altering the fixed leg tube. Each leg mounts with a 4 9/16 inch, or 116 mm, square mounting plate, giving a broad connection area at the underside of the top. This larger plate footprint helps spread the load into the top material and provides multiple screw locations for secure attachment where the table design allows.
Using Peter Meier Rockwell Legs In Real Jobs
Where These 28 Inch Rockwell Legs Work Best
The Rockwell leg set at 28 inches high is suited to applications where a standard table-height work surface is desired from the floor to the top underside. In offices or shops that use work surfaces for seated tasks, this height supports layouts where chairs or stools are placed around a table or shared bench. The 2 inch square leg geometry aligns well with square or rectangular tops, giving clear alignment points when positioning the 4 9/16 inch square mounting plates near corners or along edges. Because the mounting plate is also square, it can be oriented in multiple directions while still presenting the same footprint, which helps on layouts with varying grain or edge constraints at the underside of the top. The black matte finish allows these legs to coordinate with darker laminates or painted tops where a subdued support structure is preferred.
Details That Support Level, Repeatable Installations
The 1 1/8 inch adjustable foot on each leg provides a controlled way to dial in final height, which is valuable when several tables must align to the same working plane across an uneven floor. By using the adjustment at the foot rather than cutting the leg tube, the installer keeps the manufactured 28 inch reference intact on every leg, supporting consistent results across a large installation. The 4 9/16 inch (116 mm) square mounting plate offers a generous screw pattern area, which helps create a stable connection between top and leg under typical table loads. As a matched set branded by Peter Meier, Inc., the four legs share the same dimensions and finish, which simplifies layout and contributes to uniform height and appearance from one corner of the table to the next.
Common Questions About Rockwell Table Leg Sets
What is the overall height of each Rockwell leg?
Each leg in the Rockwell leg 4-piece set is 28 inches high, so the work surface is supported at a standard table-height reference before any foot adjustment is applied.
How does the 1 1/8 inch adjustable foot help in use?
The 1 1/8 inch adjustable foot at the bottom of each leg lets you fine-tune table height, which helps level the surface and match heights across multiple tables on uneven floors.
What are the dimensions of the mounting plate?
The mounting plate on each Rockwell leg is 4 9/16 inches, or 116 mm, square, giving a broad contact area to spread loads into the underside of the work surface.
What is the width and shape of the Rockwell leg tube?
Each Rockwell leg is 2 inches wide with a square profile, providing a straight-edged support that aligns well with square or rectangular table and work surface designs.
What finish is supplied on this Peter Meier leg set?
The Peter Meier Rockwell leg set is supplied in a black matte finish, which creates a low-glare appearance that pairs well with darker tops and other black matte components.
How many table legs are provided in this Rockwell set?
The Rockwell leg set is a 4-piece set, providing four matching legs so each corner of a typical rectangular or square table can be supported with the same leg style.
Choose This Rockwell Leg Set For Table Projects
The Square Rockwell table leg set from Peter Meier, Inc. offers four 2 inch wide, 28 inch high square legs in a black matte finish with a 1 1/8 inch adjustable foot and 4 9/16 inch square mounting plate, giving installers defined dimensions for building or upgrading table-height work surfaces through Wurth Baer Supply.