2 Inch Wide 28 Inch Rockwell Table Leg Set Use

2 inch wide 28 inch square Rockwell table leg set describes a matched group of four 28 inch high table legs from Peter Meier, Inc., giving a consistent working height for work surfaces and tables. The 2 inch square profile creates a uniform leg footprint, which helps layouts where multiple legs need to line up visually along cabinets or counters. The brushed steel finish provides a clean metal look that coordinates with other brushed fittings in shops, offices, or residential spaces. The set design keeps all four legs on the same spec, which supports even support across corners and sides of a straight run or island. With a dedicated manufacturer part number, 850-28-ST, these legs are easy to reference for repeat jobs or service replacements without re-measuring on each project.

Rockwell Table Leg Set Details For Projects

• The 2 inch wide square profile defines a clear bearing area at each corner, which helps spread load on the floor and keeps leg alignment straightforward when laying out multiple support points along a top.
• The 28 inch high dimension sets a predictable work surface or table height once the top thickness is known, which simplifies planning when matching adjacent casework or existing counters.
• The brushed steel finish presents a consistent metal appearance, which suits visible table bases in commercial or residential spaces where exposed structural legs are part of the design.
• The set of four legs gives the same geometry at all corners, which supports stable layouts for rectangular tables or workstations using a standard four-leg configuration.
• The square form factor works with the specified mounting plate to keep rotation controlled, which is useful when aligning legs parallel to edges of a rectangular top.
• The Peter Meier, Inc. branding ties the legs to a known hardware manufacturer, which helps project documentation and ordering when coordinating with other components from the same source.

Mounting And Adjustment Characteristics Of These Legs

This Rockwell leg set has a 4 9/16 inch, or 116mm, square mounting plate, which gives a broad interface between the leg and underside of the top so loads are distributed over a larger area. That plate shape helps position screws around the leg center, which supports a firm connection at each corner of a table or work surface. An approximately 1 1/8 inch adjustable foot is part of each leg, providing height fine-tuning at the floor contact point. That small adjustment range lets installers dial out minor floor unevenness so the table stands solidly without rocking. By combining the fixed 28 inch leg height with the adjustable foot, these legs support precise final leveling across multiple support points.

Where Rockwell 28 Inch Legs Fit Into Work

Using Peter Meier Rockwell Legs On Work Surfaces

The Rockwell leg 4 piece set is categorized under work surface and tables, placing it directly in projects that need freestanding support instead of casework gables. The 28 inch high measurement aligns with typical table and desk heights once a top is added, which makes this set suitable for general work tables, shop benches with thinner tops, or office-style desks. The 2 inch square profile gives a substantial metal presence under larger tops, which is helpful when supporting wider spans at the corners of conference tables or collaborative workstations. Because all four legs share the same brushed steel finish and geometry, they work well on projects where exposed legs contribute to the visual rhythm around an island or peninsula. The square 4 9/16 inch mounting plate matches the leg profile, so the transition from top to leg looks intentional in both functional and decorative applications.

Details That Support Repeatable Mounting And Leveling

The 4 9/16 inch (116mm) square mounting plate provides a defined footprint on the underside of the top, which helps installers repeat hole patterns from leg to leg for consistent placement. That plate size offers room for a practical screw pattern around the leg center, which supports solid fastening in typical wood or composite tops. The 1 1/8 inch adjustable foot introduces a controlled range of height adjustment at each leg, allowing the installer to compensate for floor variation while keeping the table plane true across all four corners. With the fixed 28 inch main tube plus this adjustment at the base, the legs create a predictable finished height window that can be carried across multiple identical stations in a larger room. Using the manufacturer part number 850-28-ST ties these dimensional and adjustment characteristics to a single catalog reference, which simplifies reordering matching legs for expansions or repairs.

Key Questions About Rockwell 28 Inch Leg Set

Selecting This Rockwell Leg Set For Your Project

The 2 inch wide 28 inch square Rockwell table leg set from Peter Meier, Inc. combines a 28 inch height, 2 inch square profile, 4 9/16 inch square mounting plate, and an approximately 1 1/8 inch adjustable foot. Those dimensions define how the legs support and level a work surface or table, from the underside mounting area to final floor contact. When a project calls for brushed steel legs in a standard table-height range, this 850-28-ST set gives a single, repeatable specification for building or expanding workstations, desks, and tables with matching support geometry.