2" Wide x 34-1/2" High Square Rockwell Table Leg Set, Black Matte, 4/Set

Square Rockwell Table Leg Set For Stable Worktops

square Rockwell table leg set from Peter Meier, Inc. provides a matched group of four table legs for building or supporting work surfaces and tables. The legs are 34-1/2 inches high, so they suit projects that need this height for counters or work tables, giving a consistent working level along the entire surface. Each leg has a 2 inch wide square profile, which presents a straight, clean line that helps layouts where legs need to align visually with cabinet edges or straight runs. The legs are finished in black matte, so they offer a neutral, low-glare appearance that fits many commercial and residential layouts without drawing attention away from the top. The set design allows installers to keep height and style uniform on multi-leg assemblies while working from a single manufacturer part number, 850-34-02.

Key Rockwell Table Leg Details For Projects

• The 2 inch wide square leg profile creates a defined, straight corner at each support point, which helps when aligning legs flush with cabinet sides or framing members in a layout.
• The 34-1/2 inch high leg length positions the work surface or table at a height suited to counter-style applications, supporting consistent ergonomics across adjacent runs of cabinetry.
• The 1 1/8 inch adjustable foot built into each leg allows small height changes at the floor contact point, which helps installers deal with minor floor irregularities while keeping the top level.
• The 4 9/16 inch, or 116mm, square mounting plate at the top of each leg spreads load over a broader area, which supports stable attachment to the underside of the work surface or table top.
• The black matte finish on the legs provides a dark, non-reflective appearance, which works well when the design calls for the support structure to visually recede under the surface.
• The Peter Meier, Inc. manufacturer part number 850-34-02 identifies this specific Rockwell leg set, which aids in selecting identical components for repeat projects or future expansions.

Rockwell Table Leg Mounting And Adjustment Use

The 4 9/16 inch, or 116mm, square mounting plate on each Rockwell leg provides a defined footprint for fastening to the underside of the table or work surface, which supports a predictable screw pattern and helps distribute weight across more surface area. The 1 1/8 inch adjustable foot at the opposite end of the leg allows height fine-tuning after the top is attached, so installers can compensate for slight floor variations while keeping the surface plane true to adjacent cabinetry or equipment. With the legs measuring 34-1/2 inches high, the assembly fits counter-height layouts that require a stable, fixed-height base before any adjustment, leaving the adjustable range to handle only final leveling tasks rather than broad height changes.

Rockwell Legs In Work Surface And Table Builds

Where Rockwell 34-1/2 Inch Legs Are Used

The Rockwell leg 4-piece set in 34-1/2 inch height supports work surface and table projects that call for a counter-level finished height from the floor. The 2 inch square leg profile suits straight-line cabinet and workbench runs where the leg faces are expected to align with edges or framing members, keeping a square, uniform look along the front. The 4 9/16 inch, or 116mm, square mounting plate on each leg gives a generous contact area at the top, which is useful on heavier tops or wider work surfaces that benefit from a broad connection zone. The black matte finish allows these legs to serve under both light and dark tops without reflecting overhead light, fitting environments such as workshops or task areas where glare reduction matters. With four legs together in one set, a single selection addresses the support needs of a standard rectangular work surface using one consistent style.

Why Rockwell Details Support Repeatable Results

The combination of a 34-1/2 inch fixed leg height and a 1 1/8 inch adjustable foot gives installers a defined baseline dimension with controlled adjustment, which supports repeatable finished heights across multiple stations or matching counters. The 2 inch square cross-section gives each leg a predictable face dimension, so layouts that require exact spacing near cabinet sides or equipment can be planned around that consistent width. The 4 9/16 inch, or 116mm, square mounting plate provides a known plate size for jigs or templates, which helps fabricators drill or mark underside patterns the same way across many tops. The black matte finish keeps the appearance consistent from leg to leg, supporting projects where multiple work surfaces share exposed supports in the same room. Using the manufacturer part number 850-34-02 ties all these details to one Rockwell leg set specification, supporting straightforward reorders when matching earlier installations.

Common Questions About Rockwell Table Leg Set

Choose This Rockwell Set For Counter Projects

The Peter Meier square Rockwell table leg set in 34-1/2 inch height, with 2 inch square legs, a 4 9/16 inch, 116mm mounting plate, and a 1 1/8 inch adjustable foot, offers a defined solution for counter-level work surfaces. The black matte finish and matched four-leg set help installers and fabricators build consistent, repeatable support structures across multiple tops. Selecting this Rockwell configuration allows projects to align around a single, documented leg style that fits counter-height layouts.