Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rockwell table leg set defines this 2 inch wide by 34-1/2 inch high square leg system as a matched group for building or supporting work surfaces and tables where consistent height and alignment matter. The stainless steel construction provides a solid, rigid support structure that stands up to regular use in work surface and table applications. The legs are configured as a set of four, giving a uniform base when you are building a table, counter, or similar surface that depends on four-point support to sit level. The square leg profile helps orient the legs consistently at each corner, which simplifies layout when positioning tops and planning edge reveals. The overall height paired with the adjustable foot gives a practical range for standard table-height projects while still letting you fine-tune final height during installation.
The 4 9/16 inch (116mm) square mounting plate provides a clear footprint for fastening each leg to the underside of a table or work surface, which helps you position the legs consistently at the corners or along edges. The 2 inch square leg body ties directly into this plate, creating a straight, continuous line from mounting point to floor that simplifies layout when you are marking locations. The 34-1/2 inch overall leg height partners with the 1 1/8 inch adjustable foot at the base, so you can set a target working height and then use the adjustment range to level the surface after the top is in place. This combination supports efficient installation when aligning multiple legs under a single top.
The 34-1/2 inch high configuration places these Peter Meier, Inc. legs in the range commonly used for tables and similar work surfaces, which suits projects where users sit or stand at a standard table height. The 2 inch wide square profile offers a straightforward geometry for positioning at the corners of rectangular tops, helping keep leg faces parallel with edges for a clean alignment. The stainless steel build supports use in environments where tables or work surfaces see frequent handling, since the leg material acts as the structural element beneath the top. The 4 9/16 inch (116mm) square mounting plate gives a defined contact area under the work surface, so the leg set serves well in applications where the underside of the top has enough space to accept that plate footprint. The 1 1/8 inch adjustable foot at the base of each leg allows these legs to work in rooms where floors are not perfectly flat, because the adjustment supports bringing the working surface into a single plane across all four legs. Together, these details suit general work surface, table, counter, and bar-height project families specified for this Rockwell series.
The Rockwell table leg set pairs a fixed 34-1/2 inch leg body with a 1 1/8 inch adjustable foot, which gives an installer a defined adjustment window to correct for floor variations while still keeping overall height within a predictable band. That matters when several tables, counters, or bar units must align along a wall or through a room, because each leg set can be tuned to the same working plane. The 2 inch square leg cross-section also provides four flat reference faces, which helps maintain repeatable orientation when installing multiple units and aligning legs relative to top edges or cabinetry lines. The stainless steel material maintains the leg geometry while supports and tops are attached, which supports repeatable assembly on shop jigs or on-site layouts. The 4 9/16 inch (116mm) square mounting plate offers consistent hole spacing from leg to leg, allowing a fabricator to develop drilling or layout patterns that can be reused on multiple tops built around the 850-34-SS configuration. As a set of four legs matched under one part number, this Rockwell configuration supports repeatable fabrication workflows whenever the same height and style are required on a series of work surfaces.
The Rockwell table leg set at 34-1/2 inches is aligned with typical table-height and similar work surface applications, so it fits projects planned around standard table working levels.
The adjustable foot on each leg allows fine height changes at the floor, which helps bring the table or work surface into level when dealing with uneven substrates.
The 4 9/16 inch (116mm) square mounting plate provides a broad connection area under the top, which spreads loads and supports a stable attachment between leg and work surface.
The 2 inch square stainless steel legs provide a solid structural profile with flat faces for alignment, which supports stable, repeatable positioning under work surfaces.
The consistent 34-1/2 inch leg height, paired with the adjustable foot and uniform mounting plate, supports building multiple tables at matching working levels.
The 850-34-SS part number identifies this Rockwell leg configuration as a 34-1/2 inch high, 2 inch square, stainless steel table leg system from Peter Meier, Inc.
This Rockwell table leg set from Peter Meier, Inc. combines 2 inch square stainless steel legs, a 34-1/2 inch working height, a 4 9/16 inch (116mm) square mounting plate, and a 1 1/8 inch adjustable foot. Together these details support building table, counter, and bar-height work surfaces around a single, consistent leg specification. When a project calls for a defined height range, a square leg profile, and stainless steel construction under one part number, the 850-34-SS Rockwell configuration provides a focused option for setting up stable work surfaces.
Sold In: 1 Set
