Rockwell Table Leg Set 28 Inch For Work Surfaces

Rockwell table leg set 28 inch from Peter Meier, Inc. is a square table leg set designed for work surfaces and tables where a consistent 28 inch height is needed. The set uses legs that are approximately 2-3/8 inches wide and square, so each leg presents a 2.36 inch square profile that suits modern straight-line designs in shop, office, or residential projects. The legs are made in a brushed steel finish, which provides a neutral metallic look that pairs well with a wide range of tops and surrounding hardware in workrooms and living spaces. This set is identified by manufacturer part 860-28-ST, allowing installers to match product details precisely when repeating a successful layout or when matching an existing Rockwell installation on a new run of tables.

Rockwell Square Legs Features That Support Builds

• The legs are described as table height, so they are suited for standard work surface and table projects where a 28 inch nominal leg height is required across a run of tops.
• An approximately 2-3/8 inch, or 2.36 inch, square leg profile creates a substantial footprint at each corner, helping distribute loads from work surfaces onto the floor in a predictable way.
• The brushed steel finish offers a clean, even metallic appearance that works with many laminate and wood tops, supporting cohesive furniture runs in commercial or shop environments.
• The Rockwell naming and 860-28-ST part number tie this set to the Rockwell family, so installers can align it with other Rockwell components in layouts that carry the same visual line.
• The product is categorized under work surface and table legs, which positions it for use wherever dedicated leg support is required under freestanding tops in woodworking or fabrication jobs.

Mounting Plate And Height Details For Installers

The Rockwell table leg set 28 inch uses a 4 9/16 inch, or 116 mm, square mounting plate that interfaces between each leg and the underside of the top, giving a defined contact area for layout and fastener placement. The legs are described as table height and are paired with a 1 1/8 inch adjustable foot, which allows installers to fine-tune the effective height and compensate for modest floor variation while still targeting a 28 inch working height. With a square leg and square plate, the geometry supports straightforward corner alignment, so fabricators can position legs consistently at edges or inset positions along a line of cabinets or workstations.

Using Rockwell Table Legs In Real Projects

Where Rockwell Table Leg Set 28 Inch Works Best

The Rockwell table leg set 28 inch is classified under work surface and tables, which positions it for use under freestanding worktops, desks, and tables in woodworking, shop, or office builds. The 2.36 inch square leg dimension gives a sturdy visual and structural presence at corners, which is useful when supporting wider tops or heavier work surfaces commonly used in trade shops and fabrication areas. Because the mounting plate is a 4 9/16 inch square, the interface area under the top is clearly defined, giving carpenters and installers a repeatable footprint when laying out multiple legs along a bank of workstations. The brushed steel finish helps this set blend into mixed-material projects where metal legs meet wood or laminate tops, supporting consistent appearance across multiple pieces in the same space.

Height Adjustment And Mounting That Reduce Rework

The Rockwell table leg set 28 inch is described with a 1 1/8 inch adjustable foot, which provides usable travel at the floor end of each leg so the installer can establish level work surfaces even when the subfloor is not perfectly flat. This adjustability means the nominal 28 inch leg height can be tuned in the field, helping align adjacent tops when several tables or work benches sit side by side in a row. The 4 9/16 inch square mounting plate gives a predictable pattern for fastener placement, so once an installer has laid out one top, the same measurements can be repeated across a job for consistent alignment. With a square leg matching a square plate, orientation at the corner stays intuitive, helping installers maintain straight edges and clean sight lines without repeated trial-and-error rotation during mounting.

Common Questions About Rockwell Square Table Legs

Select Rockwell Table Legs For Consistent Worktops

The Rockwell table leg set 28 inch from Peter Meier, Inc. combines a 2.36 inch square brushed steel leg, a 4 9/16 inch square mounting plate, and a 1 1/8 inch adjustable foot to support table-height work surfaces. At Wurth Baer Supply, this Rockwell set aligns with work surface and table applications where installers want a defined mounting interface and on-site height adjustment to achieve level tops. When a project calls for square brushed steel legs with a known Rockwell part number, this 860-28-ST set offers a repeatable option for new builds or matching existing Rockwell-based installations.